Moisture Triggered, Single Application, Hydrophobic Instant Waterproof Liquid Membrane

Long Lasting Protection of New and Refurbished Flat Roofs, Balconies and Walkways - Perfect for UK Weather Conditions.

What makes SilaCote different?

SilaCote has high elongation and is highly flexible, however unlike most two-part roof coating systems it doesn’t contain any plasticizers (the substance that is added to a material to make it softer and more flexible). When exposed to UV (sunlight), plasticizers migrate and evaporate eventually leaving the coating brittle and prone to splitting.

As a hydrophobic waterproof coating - sitting / ponding water has no effect on its performance.

Adhesion values of SilaCote are second to none, once applied it provides instant waterproofing to any substrate (rainproof within 15 minutes). Unlike most coating systems where the adhesion value decreases over time and you could peel the membrane, SilaCote adhesion makes impossible to peel the coating from the substrate due to the polymer design technology.

Peace of mind - 100% Solids - The DFT applied will not reduce once the coating has cured.

SilaCote can be used to waterproof nearly all substrates with the following benefits:-

EASILLY HAND APPLIED

SOLVENT FREE

NO PRIMER REQUIRED

NO TOP COAT REQUIRED, - 100% Aliphatic / UV Stable (No Colour Change)

UNLIMITED OVERCOAT TIME

USE ONLY WHAT YOU NEED / NO WASTE

100% SOLIDS

LIGHT FOOT TRAFFIK 4 HOURS

SAVES MONEY ON MATERIALS AND LABOUR

SilaCote - Non-Flammable and Non-Hazardous Coating Systems

Fire Rating

BS 476 part 3 test:- EXT.F.AA;
EN 1187 test 4 – BROOF(t4) tested as a flat roof

Addresses issues such as priming the substrate (no primer required), mixing errors (single component), over-coating window (there is none), waste (you can reseal the pot for the next job), upstand detailing (it adheres easily – no runs) and finally SilaCote does NOT have outgassing issues (bubbling).

Adheres to

Polyurea, Asbestos or fibre cement, Profiled metal roofs,
Aged/weathered felt, Asphalt, EPDM, Thermoplastic, Single ply membranes,
Asbestos, Steel, Plastisol, Concrete, Lead, Fibreglass, Sprayed polyurethane
foam, Tar and gravel, Modified bitumen, Built-up systems (BUR), Cap sheet,
Torch down mineral felt, WPB plywood, OSB Cement board.

Application to

Flat roofs, balconies, terraces, walkways

Recoating failed single ply roofs

Roof detailing, e.g. light domes, air conditioning outlets

Internal plant rooms and wet rooms

Complex detailing, up-stands, penetrations and terminations

Ponds, fountains /water features

Warm roofs, cold roofs, /inverted warm roofs

Green roofs, brown roofs / living walls

Horizontal under-tile waterproofing

Waterproofing gutters, valley gutters /drainage channels

Warranty

Fully qualified technical support available.

20 year manufactures warranty.

IBG available @ approx. 3% of contract value.

Fully BBA and ETAG compliant.

Discount

Use Code E1A4X4BK1BA5 for an introductory 10% DISCOUNT. 

T: 0800 7022176

E: rich.walker@clevershield.co.uk

TDS

SilaCote ST200 Data Sheet

Primers not required

We have added some pictures (below), kindly sent to us by one of our existing applicators who recently tested SilaCote on various substrates.

SilaCote Instant Waterproofing
SilaCote Debonding Tape
SilaCote Instant Waterproofing
SilaCote Instant Waterproofing
SilaCote Instant Waterproofing
SilaCote Instant Waterproofing on Lead
SilaCote Instant Waterproofing over MDF
SilaCote Instant Waterproofing over Timber
SilaCote Instant Waterproofing over OSB Board
SilaCote Instant Waterproofing over Polyurea


 
T: 0800 7022176
E: rich.walker@clevershield.co.uk
W: clevershieldcoatings.co.uk
 
#SilaCote #waterproofing #roof #london #membranes #sprayapplied #specifiers #flatroofwaterproofing #roofwaterproofing #coatingapplicators #liquidcoating