Clever Shield Coatings UK - Polymer Liquid Coating Consultants and Distributors for Flat Roof Waterproofing and Protective Structural Coating Membranes 0800 7022176

CONIFLOOR 110 (10 or 25 KG)

CONIFLOOR 110 (10 or 25 KG)

Regular price
Sale price
Regular price
Sold out
Unit price
25.0 kg
Shipping calculated at checkout.


Two part EP resin primer, solvent free, for priming and mortar resin

CONIFLOOR 110 is a solvent free, low viscosity, two component epoxy resin based primer.

CONIFLOOR 110 is supplied in working packs, which contain the correct proportions of component A (resin) and component B (hardener)


CONIFLOOR 110 is designed for use as a primer on mineral substrates indoors and outdoors such as concrete and cementitious screeds.

It is suitable for use as a pore and capillary sealing and for levelling layers and scratch coats.

For this purpose the product is – after mixing of component A and B – filled with oven dried quartz sand.

The degree of filling depends on the temperatures as well as on the thickness of the layer and should be between 0.5 up to 2 referred to the primer (ratio by weight).

  • CONIFLOOR 110 has very low viscosity and therefore shows high capillary activity. The material has very good adhesion to substrates based on minerals and / or cement. The primer is all-purpose.
  • The material is easy to process and moisture blocking (in a 2-fold application when film forming).
  • The yellowing, which occurs when exposed to UV light, does not impair its technical properties.
  • Fully cured, CONIFLOOR 110 exhibits very good mechanical properties. It is resistant to water, sea and wastewater as well as to a variety of alkalis, diluted acids, brine, mineral oils, lubricants and fuels.

CONIFLOOR 110 Datasheet

Conifloor 110 Primer Datasheet