Eagle Double Coat Pro-Reflect

Double Coat Pro-Reflect is an elastomeric liquid waterproofing membrane, reinforced with microfibres and a high aluminium content.

Ideal for waterproofing most surfaces that are typically found on roofs, including galvanised steel, zinc plates, asbestos, cement, asphalt felt, asphalt, bitumen sheets. Suitable for protecting exposed metal structures such as storage tanks, pipes and facings against corrosion. Highly recommended for industrial facilities and warehouses.

Uses:

•    Waterproofing with UV-resistance of roofs that consist of different materials.
•    Corrosion protection for metal structures exposed to the weather.

Double Coat Pro-Reflect is an elastomeric liquid waterproofing membrane, reinforced with microfibres and a high aluminium content.

Ideal for waterproofing most surfaces that are typically found on roofs, including galvanised steel, zinc plates, asbestos, cement, asphalt felt, asphalt, bitumen sheets.

Suitable for protecting exposed metal structures such as storage tanks, pipes and facings against corrosion. Highly recommended for industrial facilities and warehouses.

Applications

• The support surface must be clean, dry and free from dust and loose debris.
• Recently applied coatings must be exposed to the weather for 2 weeks before applying Double Coat Pro-Reflect.
• All traces of fungal and algal growth must be removed with a stiff-bristled brush or low-pressure waterjet.
• After removing all the algae and fungi, treat the surface with a fungicide. Storage.
• All surfaces must be clean, dry and free from dust and loose debris. Freshly applied coatings should be allowed to weather for 2 weeks prior to the application of Double Coat. All traces of fungi and algae growth should be removed using a stiff bristled brush or low pressure water jet. Where algae and fungi have been removed, the surface should be treated with a fungicidal wash.
• Stir the container thoroughly before use to ensure that no deposits are left at the bottom of the container. Double Coat may be applied by brush or sprayed. Do not apply in wet weather or when rain is threatened, or when poor drying conditions exists. As a protective measure on most well prepared surfaces which are in sound conditions, one layer of Double Coat is normally adequate.
• The rate of application is between 1 -2 square meters per litre per coat, depending on the conditions of the surface. Do not coat windows, roof lights, glass or translucent sheets as they will constitute a hidden hazard.
• Drying time is around 1- 2 hours, in most of weather conditions.
  
  

Packaging

• 25 Ltrs single pack. 5 Lts also available on request
  
  

CAUTION

• Shelf life of 12 months in tightly sealed containers when stored in cool, dry conditions. Care must be taken to ensure that the material is stirred thoroughly when left unused for several months. It is important to ensure that the material does not become contaminated with water, particularly, partially used containers.

Colour

Silver

Download

Data Sheet