Shop by Brand
View all
Our wide range of floor coatings are proven to offer outstanding durability from foot, fork lift and heavy construction traffic.
The coating systems are easy to apply and are based on the latest solvent free epoxy and polyurethane coating technology.
- Solvent free technology
- Epoxy or polyurethane systems
- Flexible
- Hard wearing & chemical resistant
- Available in a wide range of colours
- Applied by brush, roller or spray
Application to:
- Factory floors
- Mezzanine floors
- Car decks
- Marine decks
- Ramps
- Stairways
- Walkways
- Warehouses
- Laboratories
Metal Surfaces - stairs, stair nosings, ramps
Solvent free epoxy system
- Flexible once cured
- Fast curing—walk on in 2 hours
- 3mm + film thickness
- Simple and easy to apply
- Proven system for marine, chemical
Petrochem Industries
- Ideal for small applications in non spark areas
- Good chemical resistance to diesel, oil and mild aqueous industrial chemicals
Stair nosings in an oil refinery could only be manually abraded.
The metal surface had ingrained oils and grease and were wiped down with solvent.
104 Metal Repair fluid XF was applied by applicator tool and covered with 3mm bauxite aggregate. The anti slip coating was fully cured with 2 hours.
Over 1000 stairs and stair nosings were coated with the 104 Metal Repair Fluid XF anti-slip system
Product recommended for this type of application…. 104 Metal Repair Fluid XF is a two component solvent free fast curing epoxy repair fluid. The product has been designed to be applied to manually prepared oily surfaces.
Metal Surfaces - marine decks and steel mezzanine floors
Solvent free polyurethane system
- Flexible once cured
- Ready for heavy traffic within 72hours (20˚C)
- 3mm + film thickness
- Simple and easy to apply
- Proven system for marine, chemical
manufacturing and power generation industries
- Ideal for large surface areas in demanding industrial & marine environments
- Chemically resistant to diesel, petrol, oil & grease
Resichem 507 DWPU was chosen as a ferry deck anti-slip coating system. Surfaces were mechanically abraded and degreased to remove all surface contaminants.
507DWPU was applied at a wet film thickness of 2mm and fully blinded with 3mm coarse bauxite aggregate.
The coating system has been used on 1000’s of square metres of marine decks and steel mezzanine floors.
Product recommended for this type of application…. 507 DWPU is a two component solvent free polyurethane coating that has been designed to be applied to steel decks and floor surfaces. The coating once cured offers a tough, durable and flexible finish capable of dealing with high volume heavy vehicle traffic.
Concrete Surfaces - factories, light industrial, warehouses
Solvent free epoxy system
- Ready for foot traffic within 48 hours (20˚C)
- Ready for forklift traffic within 72 hours (20˚C)
- Simple and easy to apply
- Incorporate 1mm clear aggregate for anti-slip finish
- Proven system for warehouse, light industrial applications
- Good chemical resistance to diesel, oil and mild aqueous industrial chemicals
Powder blending plant had slip issues with the concrete factory floor. The concrete surface was primed with Resichem 503 SPEP low viscosity epoxy primer. Base coat of Resichem 590 Epoxy FC was applied and 1mm clear quartz aggregate was broadcast into the wet surface. Once dry a 2nd coat of material was applied to the floor to encapsulate the aggregate.
Product recommended for this type of application…. Resichem 590 Epoxy FC is a two component solvent free epoxy floor coating with a gloss finish when fully cured. The coating can withstand contact with mild aqueous industrial chemicals.
Concrete Surfaces - kitchens, laboratories, balconies
Solvent free epoxy technology
- Available in a wide range of decorative colours
- 1–1.5mm pigmented quartz aggregate
- System ready to walk on within 48 hours (20˚C)
- Anti-slip decorative finish
Housing Association required a waterproofing system for over 60 balconies at a complex in the UK. 592 Epoxy DF was chosen due to its anti-slip and decorative finish. A base coat of resin was applied at 500-700 microns and then fully blinded with pigmented quartz aggregate. Once cured a light stable sealer coat was applied to the surface to encapsulate the decorative finish
Product recommended for this type of application…. Resichem 592 Epoxy DF is a multi component flooring system for areas that require a decorative finish. The system has been designed to be applied to primed concrete surfaces and is based on the latest solvent free epoxy technology.
Concrete Surfaces - Chemical resistant anti-slip finish for industrial
Solvent free epoxy novolac technology
- Apply to abrasive blast cleaned metallic surfaces
- Apply to primed concrete surfaces
- Withstands immersion and contact with 98% Sulphuric acid, 75% Phosphoric acid, 36% Hydrochloric acid
- Incorporate a 2mm bauxite aggregate to give a hard wearing chemical resistant anti-slip finish
Product recommended for this type of application…. Resichem 511UCEN is a two component solvent free epoxy novolac coating capable of withstanding immersion and contact with high concentration industrial chemicals.
.
