Tecnopol Tecnocoat P2049

Pure Polyurea Membrane – High-Performance Waterproofing & Coating

The Pure Polyurea Membrane is a fast-setting, hot-spray-applied waterproofing system designed for superior durability, flexibility, and seamless adhesion. This high-pressure, two-component system forms a joint-free, fully adhered membrane with exceptional mechanical properties and Shore hardness, making it ideal for high-performance waterproofing and protection.

Composed of Tecnocoat P-2049/A (isocyanates) and Tecnocoat P-2049/B (amines), this membrane ensures long-lasting performance in civil engineering, industrial, and commercial applications.

Key Features & Benefits

✔ Seamless & Fully Adhered – No joints or overlaps, providing 100% waterproofing.
✔ Fast Setting & Quick Curing – Tack-free in ±5 seconds, allowing for rapid installation.
✔ High Mechanical Strength – Tensile strength >20 MPa, ensuring durability in extreme conditions.
✔ Flexible & Elongable – Elongation at break >350%, making it resistant to structural movement.
✔ Certified & Compliant – ETA, BBA, DTA, BS-6920, WRAS, and EN 1504-2 approvals for various applications.
✔ Chemical & Abrasion Resistant – Ideal for industrial, marine, and high-traffic environments.

Ideal Applications

• Sloped & Flat Walkable Roofs, IRMA, Balconies & Overhangs (ETA 11/0357, BBA 16/5340, DTA 19.2665)
• Green Roofs (P4:TH4, ETA 11/0357, BBA 16/5340, DTA 19.2665)
• Bridge Deck Waterproofing (ETA 21/0942, BBA 24/7158)
• Tanks & Irrigation Canals (Potable Water Contact – BS-6920 & WRAS Approved)
• Parking Garages with Heavy Traffic (OS10 Compliant)
• Industrial Flooring (EN 1504-2 Certified)
• Concrete Decks, Retaining Walls & Foundations (EN 1504-2 Certified)
• Power Plants, Recycling, Waste & Water Treatment Facilities, Petrochemical Plants (EN 1504-2 Certified)
• Swimming Pools, Aquariums, Lakes & Marine Environments
• Truck Bed Linings, Furniture & Thematic Coatings
• Flat or Sloped Asbestos Roof Rehabilitation (on TECNOFOAM SPF System)
• Protective Coating for Spray Polyurethane Foam (SPF – TECNOFOAM System)

Application Method

This hot spray-applied polyurea requires specialized spray equipment for uniform distribution and optimal performance. A minimum thickness of 1.5mm is recommended for best results.

💡 Note: For specific project requirements or substrate compatibility, contact our technical department for expert advice.

📥 Download the Technical Data Sheet for Full Specifications.

Videos