Desmopol Desmoplus Accelerator

Desmoplus

Additive for the Desmopol application in one coat

Additive that gives to the single-component polyurethane membrane Desmopol several properties to facilitate its application in one layer without bubbles inside, improve its physical and mechanical properties, and give a fast dry time. It is suitable for the application of polyurethane membranes in low-temperature conditions or adverse weather conditions.

Yield

The mandatory consumption is fixed and invariable depending on the Desmopol format to be used:

•  2l. (1.70 kg) of each 25 kg. of Desmopol
• 1.2l (1.00 kg).  of each 15 kg. of Desmopol
•  0.5 l. (0.430 kg) of each 6 kg. of Desmopol

NOTE: these consumptions are invariable and fixed, they cannot be varied, neither by excess nor by defect, otherwise the membrane will not form in the adequate conditions of use. During mixing, use mechanical equipment at half revolutions to avoid the inclusion of air inside.

Application Video

Uses

For application in the following situations:

• Allows the application of the Desmopol membrane polyurethane liquid membrane in one coat of desired thickness (e.g. 2 mm./78 mils DFT), avoiding the application by successive coats, eliminating intermediate drying times, and dangers due to sudden rain
• Internal blistering elimination.

NOTE: Please call our technical department about the application to other substrates or scopes of use 0800 7022176