Desmopol Desmothix

Desmothix - Additive for Upstands and Vertical Applications

Desmothix - Polymer as a rheology modifier (thickener), it has been developed especially as a liquid additive for the polyurethane liquid membranes Desmopol to use on vertical or sloped surfaces, giving Single-component liquid, polyurethane solvent-based, moisture-cured to form a solid, aromatic, completely adhered to the substrate, seamless, without joints or overlaps, watertight and waterproof membrane to be used on new buildings or refurbishments. It can be applied by short-nap acrylic wool roll, notched trowel, or specific electric equipment properties.

Uses

For application in the following situations:
Additive for the membranes Desmopol to apply on vertical or sloped surfaces
Prevent fall of the membrane due to its drying time

NOTE: call our technical department about the application to other substrates or scopes of use 0800 7022176

Note:

Maximum 1ltr per 25 kg

For use with:

Desmopol (Technopol)

Single-component liquid, polyurethane solvent-based, moisture-cured to form a solid, aromatic, completely adhered to the substrate, seamless, without joints or overlaps, watertight and waterproof membrane to be used on new buildings or refurbishments. It can be applied by short-nap acrylic wool roll, notched trowel, or specific electric equipment.

Uses

For application in the following situations:

• ROOFING: Sloped/flat walkable roofs, IRMA, balconies, and overhangs.(ETA 10/0121, BBA 16/5340)
• Green roof(ETA 10/0121, BBA 16/5340)
  
• BRIDGE-DECK:Liquid applied bridge-deck waterprooring ( ETA 21/0734)
  
• Structural concrete slabs, and concrete walls and foundations
  
• Swimming pools, artificial lakes, and ponds - Near seawater
• Flat or sloped asbestos roofs (on TECNOFOAM, spray polyurethane foam system)
  
• As a protection for SPF (TECNOFOAM, spray polyurethane foam system)
  

NOTE: call our technical department about the application to other substrates or scopes of use 0800 7022176

Application Method

Add Desmothix in the proportion needed (maximum 1 liter per 25 kg of Desmopol. The mixing ratio is relative to the job site situation We recommend to add initially 20 ml/kg of the PU membrane and check it.

If necessary and/or if it were deemed convenient, add more additive up to a maximum of 40 ml/kg de PU membrane. Mixing continued until a homogeneous product Apply the mixture by short nap roll

Coverage

1.5kg - 1.8kg / m2

Application methods

• Roller
• Brush
• Airless Spray
• Squeegee
• Trowel
  

Widespread systems 2~3 thin coats