Eagle DT 1 14KG

EAGLE DT 1 – Detail Waterproofing Made Easy

EAGLE DT 1 is a high-performance, single-component aliphatic polyurethane (PU) resin designed for waterproofing complex and difficult-to-seal areas. It forms a seamless, flexible membrane that provides durable protection where traditional sheet membranes can be difficult or impractical to install.

EAGLE DT 1 is suitable for detailing around perimeters, joints, corners and transitions and can adhere to a range of substrates, including bituminous sheets, concrete, PVC, metal, fibre cement, ceramics and synthetic membranes. With a touch-dry time of approximately 4–5 hours and elongation in excess of 550%, it is designed for applications where flexibility and movement accommodation are important.

EAGLE DT 1 can be used for detailing applications including gutters, balconies and retaining walls, as well as around vents, flashings, parapets and other roof penetrations.

Key Benefits

• Single-component PU resin: Ready to use without mixing.
• Seamless waterproof membrane: Forms a continuous, flexible waterproofing layer when correctly applied.
• UV and weather resistant: Suitable for exposed applications where specified.
• High elongation: Elongation in excess of 550% helps accommodate movement within suitable applications.
• Fast drying: Touch-dry in approximately 4–5 hours, subject to application and site conditions.
• Multi-surface compatibility: Suitable for a range of substrates including concrete, wood, PVC, bitumen and metal, subject to correct preparation and compatibility.
• Flame-free application: Applied cold using a roller with Eagle Matting in a wet-on-wet system.

Typical Applications

• Roof detailing: Joints between dissimilar roofing materials, edges, corners and transitions.
• Roof penetrations: Detailing around vents, flashings and other penetrations.
• Gutters and balconies: Waterproofing and detailing of difficult areas.
• Retaining walls: Suitable for selected waterproofing and detailing applications.
• Tiled areas: Suitable for damp or difficult detailing areas beneath tiled finishes where specified.

Technical Specifications

• Product type: Single-component aliphatic polyurethane resin.
• Consumption: Approximately 1.5–2 kg/m².
• Solids content: 85%.
• Touch-dry time: Approximately 4–5 hours, subject to application and site conditions.
• Elongation: In excess of 550%.

Application

EAGLE DT 1 is applied as part of a detailing system using Eagle Matting in a wet-on-wet application. Surfaces should be suitably prepared, clean, sound and compatible before application. Always follow the manufacturer's current technical documentation for substrate preparation, primer requirements, application rates and system build-up.

Downloads

Technical Information

EAGLE DT 1 should be used in accordance with the manufacturer's current Technical Data Sheet and application requirements. Substrate preparation, primer selection, reinforcement, coverage and system build-up should be confirmed for the specific application.

Clever Shield supplies EAGLE DT 1 and can assist with product information, availability and manufacturer technical documentation. For project-specific system requirements, customers should refer to the manufacturer's current technical documentation and specification.

Need advice? Call 01268 472358 for product information and technical documentation.