Description
EAGLE DT 1 – Pallet Rate Waterproofing Resin for Complex Detailing
EAGLE DT 1 is a professional single-component aliphatic polyurethane (PU) waterproofing resin designed for complex detailing where sheet membranes can be difficult to form. Available at discounted pallet rates, it’s a cost-effective choice for contractors and high-volume projects needing fast, reliable waterproofing in hard-to-access areas.
- Best for: roofing contractors, commercial waterproofing, high-movement and exposed areas
- Application method: roller-applied, wet-on-wet with Eagle Matting (no mixing required)
- Typical uses: roof edges, corners, joints, flashings, gutters, balconies and transitions
Key Benefits
- Pallet rate savings: reduced cost per unit for large jobs and repeat ordering.
- No-mix formula: single-component PU resin for faster, simpler application.
- Seamless waterproof membrane: forms an elastic, continuous barrier over complex details.
- UV & weather resistant: designed for exposed conditions and long-term durability.
- High movement capability: elongation over 550% to help accommodate structural movement.
- Flame-free application: no open flame required; apply by roller using the wet-on-wet system.
Where This Detailing Resin Is Used
Use EAGLE DT 1 waterproofing resin for complex areas where detailing is critical and standard membranes can struggle to achieve a neat, continuous finish. It’s ideal for roof detailing at edges, corners and joints, for flashing repairs, and for waterproofing around transitions between different roofing materials and systems.
- Detailing at roof edges, corners, joints and flashing
- Gutters, balconies, retaining walls and under-tile areas
- Joints between different roofing materials and waterproofing systems
Specifications
- Consumption: 1.5–2 kg/m²
- Solids content: 85%
- Touch dry time: 4–5 hours
- Type: single-component aliphatic polyurethane (PU) resin
Installation Overview
- Prepare: ensure the surface is clean, dry, sound and free from dust, oils and loose material.
- Apply resin: roller-apply an initial coat to the detail area.
- Reinforce (wet-on-wet): embed Eagle Matting into the wet resin, then saturate for continuity.
- Finish: apply further coats as required to achieve a seamless, fully waterproof membrane.
Tip: For build-up guidance, compatibility advice and estimating quantities, call 01268 472358.
What You Get
- EAGLE DT 1 waterproofing resin supplied at pallet rate (bulk ordering)
- Designed for: complex detailing and difficult waterproofing areas
- System note: typically used wet-on-wet with Eagle Matting for reinforced detailing
Quick FAQs
What is EAGLE DT 1 used for?
It’s used for waterproofing complex details such as corners, joints, flashings and transitions where sheet membranes are difficult to form.
Is this product UV resistant?
Yes. DT FLASH is an aliphatic PU resin designed to offer strong UV resistance for exposed applications.
Do I need to mix it?
No. DT FLASH is single-component, so there’s no mixing—helping reduce downtime and simplify application.
How long does it take to dry?
Typical touch dry time is 4–5 hours (site conditions can affect cure times).
Downloads
Need advice? Call 01268 472358 for product and system support.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security
You may also be interested in
Recently viewed
What Our Customers Say