HydroBond 108-LM is extremely puncture resistant, with high elasticity and a 95% recovery memory. The membrane becomes fully engaged into the concrete surface to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects.
HydroBond 108-LM can be used together with HydroBond 403 Plus to provide a complete waterproof envelope to the structure, forming a Type A (barrier) waterproofing solution suitable for Grades 1a, 1b 2 and 3 as defined by BS 8102:2022. Where space is tight, HydroBond 109-LM can be applied by roller, brush or small airless spray machine.
The Newton HydroBond System is supported by BDA Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1a, 1b, 2 & 3 – BS 8102:2022.
Key Benefits
- Cold applied fully-bonded seamless membrane.
- Very elastic with no shrinkage.
- No primer required.
- Very quick to apply – up to 1000 m2 per day.
- Cost efficient – The low price of the membrane coupled with high application rates = a very low installed rate per square metre.
- Solvent free, non-toxic and odourless.
- Non-flammable – No VOCs.
- Chemically resistant.
- Highly radon resistant.
Typical Applications
- Waterproofing of basement walls as part of Newton HydroBond System.
- Standalone waterproofing membrane for basement, foundation and earth-retained walls.
Suitable Substrate
Correctly prepared substrates of:
- Concrete of at least 20kN*.
- Screed*.
- Concrete block walls with flush pointing.
- Insulated formwork walls (ICF).
- HydroSeal 908-LB screed.
* Priming required to horizontal surfaces
Product Data
Code: 108-LM & 108-LM-1
Packaging: 1000 Litres, 200 Litres
Colour: Brown (in container)
Application Rate: Dependent on use, see Datasheet
