MAPEFLOOR FINISH 630 - Two-Component, Protective Acrylic Filming Agent
MAPEFLOOR FINISH 630 is a two-component, protective acrylic filming agent in water dispersion, designed for use on concrete, ULTRATOP, and ULTRATOP LIVING floors. It offers excellent protection against wear and tear while enhancing the durability and appearance of the surface.
Key Features & Benefits:
-
Protective Finish: Provides a transparent, milky finish that enhances surface durability and appearance.
-
Abrasion Resistance: Strong resistance to abrasion, maintaining a smooth and clean surface over time.
-
Fast Drying: Dust-dry in 2 hours, with full curing in 4 days.
-
Easy Application: Can be applied with a short-haired mohair roller or airless spray system.
-
Versatile Use: Ideal for use on concrete, ULTRATOP, and ULTRATOP LIVING floors.
Technical Data:
-
Mixing Ratio: Comp A: Comp B = 10 : 0.15
-
Colour of Mix: Transparent, milky
-
Consistency of Mix: Fluid
-
Dry Substances Content (3 h at 105°C): 23%
-
Density of Mix: 1,028 kg/m³
-
Viscosity of Mix: 25 mPa·s (#1 - 100 rpm)
-
Workability Time: 60 minutes
-
Surface Temperature: +12°C to +30°C
-
Varnishing: After 6–8 hours at +23°C
-
Dust Dry (at +23°C and 50% R.H.): 2 hours
-
Set to Light Foot Traffic: 24 hours at +23°C and 50% R.H.
-
Final Hardening Time: 4 days
-
Abrasion Resistance (Taber Abrasimeter, CS17 disk, 500 revs, 1,000 g): 65 mg after 7 days
-
Storage: 12 months in original sealed packaging (protect from frost)
-
Application: Short-haired roller (mohair) or suitable airless spray system
-
Consumption: 0.15–0.2 kg/m² (depending on substrate porosity)
-
Packaging: 10 + 0.150 kg kits (2 kits A+B)
