Description
Mapei PRIMERSEAL M – Primer and Adhesion Promoter for Polyurethane Sealants and Adhesives
Mapei PRIMERSEAL M is a one-component polyurethane polymer-based primer and adhesion promoter designed to improve the bonding of Mapei polyurethane sealants and adhesives to a wide range of construction substrates. It can be used on absorbent surfaces, whether dry or temporarily damp, as well as non-absorbent surfaces.
PRIMERSEAL M also promotes adhesion of compatible Mapei hybrid and silicone sealants and adhesives when applied to non-absorbent substrates. Its impregnating action helps improve surface compactness on absorbent materials while promoting reliable adhesion between the substrate and the selected sealant or adhesive.

Key Benefits
- One-component polyurethane polymer-based primer.
- Promotes adhesion of Mapei polyurethane sealants and adhesives.
- Suitable for absorbent and non-absorbent substrates when used with compatible polyurethane products.
- Can be applied to dry or temporarily damp absorbent surfaces.
- Suitable for compatible hybrid and silicone sealants on non-absorbent substrates.
- Helps improve the compactness of absorbent surfaces.
- Transparent liquid formulation.
- Suitable for interior and exterior applications when used with compatible Mapei sealants and adhesives.
- Applied by brush for controlled surface treatment.
Where to Use Mapei PRIMERSEAL M
Polyurethane Sealants and Adhesives
PRIMERSEAL M is a specific adhesion promoter for Mapei polyurethane elastic sealants and adhesives, including compatible products from the MAPEFLEX PU and ULTRABOND PU ranges.
It can be used on the following substrate types:
- Dry absorbent surfaces.
- Temporarily damp absorbent surfaces.
- Non-absorbent surfaces.
Hybrid and Silicone Sealants and Adhesives
PRIMERSEAL M can also be used with compatible Mapei hybrid polymer sealants and adhesives, acetic silicone sealants and neutral silicone sealants, but only on non-absorbent substrates.
Examples include compatible products from the MAPEFLEX MS, ULTRABOND MS and MAPESIL ranges.
Substrate and Product Compatibility
The following summary reflects Mapei's product selection guidance:
- Polyurethane sealants and adhesives: PRIMERSEAL M on dry absorbent, damp absorbent and non-absorbent substrates.
- Hybrid sealants and adhesives: PRIMERSEAL A on absorbent substrates; PRIMERSEAL M on non-absorbent substrates.
- Acetic silicone sealants: PRIMERSEAL A on absorbent substrates; PRIMERSEAL M on non-absorbent substrates.
- Neutral silicone sealants: PRIMERSEAL A on absorbent substrates; PRIMERSEAL M on non-absorbent substrates.
For non-absorbent surfaces requiring preparation before application, Mapei also identifies ACTIPRIMER M as a suitable surface treatment for compatible systems. Always check the relevant product data sheets before selecting the primer.
Suitable Substrates
Depending on the sealant or adhesive being used, PRIMERSEAL M can be applied to a variety of construction materials.
- Concrete and cementitious materials.
- Brickwork and masonry.
- Plaster and other suitable absorbent materials.
- Untreated timber.
- Natural stone.
- Metals.
- Glass.
- Suitable plastics.
- Painted surfaces, subject to compatibility testing.
Application Instructions
Absorbent Substrates
- Ensure the surface is solid and free from dust, loose material, oil, grease, wax and poorly bonded paint.
- Remove any traces of oxidation or contamination.
- Temporary surface dampness, such as rain or dew, is acceptable where the substrate is not affected by continuous rising damp or water under pressure.
- Shake the container thoroughly before use.
- Apply PRIMERSEAL M using a suitable long-bristle brush.
- On highly absorbent surfaces, apply additional coats where necessary to achieve a continuous and homogeneous treatment.
- Allow the primer to dry before applying the compatible Mapei sealant or adhesive.
- Apply the sealant or adhesive when the primer is dry to the touch and no later than 6 hours after application.
Non-Absorbent Substrates
- Ensure the surface is dry, sound and free from dust, loose material, oil, grease, wax, poorly bonded paint and rust.
- For metal and plastic surfaces, use ACTIPRIMER M for degreasing in accordance with Mapei's instructions.
- Where ACTIPRIMER M is used first, allow it to dry for approximately 10 minutes before applying PRIMERSEAL M.
- Apply PRIMERSEAL M with a suitable long-bristle brush.
- Allow at least 30 minutes drying time before applying the compatible sealant or adhesive.
- Apply the sealant or adhesive no later than 6 hours after primer application.
Technical Specifications
- Product type: One-component polyurethane polymer-based primer.
- Consistency: Liquid.
- Colour: Transparent.
- Bulk density: Approximately 1.0g/cm³.
- Application temperature: +5°C to +40°C.
- Minimum recoat time: 30 minutes at +23°C.
- Maximum recoat time: 6 hours.
- Consumption: Approximately 100–300g/m², depending on substrate absorbency and surface condition.
- Maximum primer volume on absorbent substrates: 5% of the volume of the intended sealant or adhesive.
- Application method: Suitable long-bristle brush.
- Storage life: 15 months in original, sealed packaging under the manufacturer's recommended conditions.
Packaging
- 250ml bottle.
- 1 litre bottle.
Both sizes are supplied in boxes of 8 according to the manufacturer's packaging information.
Important Application Considerations
- PRIMERSEAL M is an impregnating treatment and adhesion promoter, not a standalone waterproofing coating.
- It may penetrate absorbent surfaces or alter the appearance of non-absorbent materials.
- Carry out a preliminary compatibility test on the actual substrate before full application.
- Do not apply to surfaces affected by continuous capillary rising damp or water under pressure.
- Ensure the selected primer is compatible with the intended sealant or adhesive.
- Apply the sealant or adhesive within the manufacturer's specified 6-hour maximum interval.
- For professional use. Follow the current manufacturer's technical and safety data sheets.
Technical Downloads
Refer to the manufacturer's technical data sheet for the complete product compatibility table, surface preparation and application instructions.
Frequently Asked Questions
1. What is Mapei PRIMERSEAL M used for?
PRIMERSEAL M is used as a preliminary primer and adhesion promoter before applying compatible Mapei polyurethane sealants and adhesives. It can also be used with compatible hybrid and silicone sealants on non-absorbent surfaces.
2. Can PRIMERSEAL M be used on damp surfaces?
Yes. It can be applied to temporarily damp absorbent substrates, provided they are not subject to continuous rising damp or water under pressure. Non-absorbent surfaces must be dry before application.
3. Can PRIMERSEAL M be used with silicone sealants?
Yes, with compatible Mapei silicone sealants on non-absorbent substrates. For absorbent substrates, Mapei specifies PRIMERSEAL A instead.
4. Can PRIMERSEAL M be used with polyurethane sealants?
Yes. It is designed for compatible Mapei polyurethane sealants and adhesives on dry or temporarily damp absorbent surfaces and non-absorbent substrates.
5. How long should PRIMERSEAL M dry before applying sealant?
The manufacturer's stated minimum recoat time is 30 minutes at +23°C. Apply the compatible sealant or adhesive no later than 6 hours after primer application.
6. What is the coverage of PRIMERSEAL M?
Consumption is approximately 100–300g/m², depending on the absorbency and condition of the surface. Actual coverage will vary with the substrate.
7. What sizes is PRIMERSEAL M available in?
PRIMERSEAL M is supplied in 250ml and 1 litre bottles.
Buy Mapei PRIMERSEAL M from Clever Shield
Clever Shield Coatings UK supplies Mapei sealants, adhesives and surface preparation products throughout the UK. PRIMERSEAL M is available for professional contractors undertaking sealing, bonding, glazing and construction joint applications.
Clever Shield supplies products and does not design or specify waterproofing or sealing systems. Always follow the manufacturer's technical documentation and confirm compatibility with the intended sealant, adhesive and substrate.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security

You may also be interested in
Recently viewed
What Our Customers Say
Very good 4.7/5
Exceptional Advice & Support
Hands down in all of my reviews I've done in 21+ years, Clever Shield Coatings is one I'll always remember as the staff are friendly & passionate about their job - looking out for the customer and getting the job done right first time.
Sunny
Verified customer
Fast, friendly and reliable…
Fast, friendly and reliable. I was able to get my job done quickly and my customer was happy with the prices.
Thanks.
Kamil
Verified customer
Exceptional Advice & Support
We have been using clever shield (dealing with Richard) for over 2 years. They always give good service deliveries on time and even give technical advise when needed.
JAC
Verified customer
Really helpful! great service
Spoke to technical for some advice on the product and it was really helpful, great service
Tina Mansfield
Verified customer
Great company / knowledgeable
What a great company - knowledge about the products, spent lots of time talking me through everything - if only every company was like this one !
Ostler Info
Verified customer
Great company and speedy delivery
Really great company to deal with,excellent customer service,speedy delivery will definitely recommend and use again as a satisfied customer
Del Upson
Verified customer
Great Technical Support
Great technical support and advice on wykamol products would highly recommend this company
Shirley
Verified customer
Highly Recommended
Sandra Dow
Verified customer


