Soudabond Easy Genius

Soudabond EASY is a high performance polyurethane adhesive foam. Quick and easy to use - no mixing required. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces. Used for the bonding of many building materials, such as insulation panels, plasterboard and the construction of interior walls using lightweight building blocks. Genius Gun® is a patented trigger mechanism, designed for easy use and single handed operation. The re-sealable applicator enables the product to be re-used for up to 6 weeks after first use.

Open technical data sheet

Properties

• Single component PU adhesive
• Up to 30% quicker than traditional methods
• Gap-filling capabilities
• No mixing required
• Porous and non-porous materials
• Available in Hand Held, Gun Grade and Genius Gun

TDS

Technical data sheet

Instructions

• Wear safety goggles. Ensure there is sufficient ventilation and keep away from flames. Make sure surfaces are clean and free of grease and dust. Spraying water on the surfaces will improve adhesion and speed up curing. Shake can vigorously for 30 seconds. Repeat regularly for maximum yield. Use upside down. Point nozzle and press trigger. Amount of trigger pressure defines speed at which foam extrudes. Apply PU Adhesive according to application, as per the technical data sheet. Apply in a zig-zag pattern onto one of the surfaces to be bonded. Wait until the foam becomes sufficiently tacky; i.e. thread is formed between gloved finger and adhesive when briefly touching adhesive (usually about 4 minutes depending on conditions). Then press materials firmly together for 30-60 seconds. Leave to cure for at least 1 hour before applying loads. Store can upright in dry conditions between +5°C and +25°C.

Applications

• Clean, efficient and economical bonding of many types of Insulation panels - polyurethane, phenol, resin foam. Can also be used for bonding polystyrene. Bonding of gypsum plasterboard in dry lining applications. Can be used for bonding non-load bearing walls. Bonds many other building materials such as brick, stone, aluminium, ceramics, MDF, steel, cork, wood and chipboard.