Description
Soudal Soudaflex 33SL – Self-Levelling Chemical Resistant Polyurethane Floor Sealant
Soudal Soudaflex 33SL is a high-performance, one-component, self-levelling polyurethane sealant developed specifically for horizontal concrete floor joints and expansion joints. Its moisture-curing formulation forms a permanently elastic seal with excellent adhesion to many construction materials and resistance to a wide range of chemicals, oils and fuels.
Designed for industrial floors, garages, workshops, parking areas and other environments where joints may be exposed to fuel and oil, Soudaflex 33SL accommodates joint movement while providing a durable, flexible seal. Its self-levelling consistency makes application straightforward in horizontal joints, and it can be used on surfaces with gradients of up to 4%.
The formulation is resistant to bubbling in high-temperature and humid application conditions and is non-staining on natural stone and concrete.

Key Features and Benefits
- One-component, self-levelling polyurethane floor joint sealant
- Designed for horizontal concrete floor joints
- Permanently elastic after curing
- Maximum permitted joint movement of ±25%
- Excellent resistance to many chemicals
- Resistant to splash and spillage contact from petrol, oils, lubricants and hydraulic fluids
- Can withstand intense chemical contact and immersion for up to one week with Primer 100, where specified by the manufacturer
- Suitable for gradients up to 4%
- Good weather and UV resistance
- Non-staining on natural stone
- Does not form bubbles in high-temperature and humid application conditions
- Conforms to DIN EN 14187-4, DIN EN 14187-5 and DIN EN 14187-6
Suitable Applications
- Concrete floor expansion joints
- Shrinkage joints in concrete floors
- Industrial flooring joints
- Garage and workshop floor joints
- Parking areas and vehicle-accessible floors
- Flooring joints exposed to oils and lubricants
- Joints exposed to hydraulic fluids
- Floor joints exposed to petrol and other fuels
- Horizontal construction, connection and movement joints
- Commercial and industrial concrete flooring
Chemical Resistance
Soudaflex 33SL is designed for flooring joints where exposure to chemicals, oils and fuels may occur. The manufacturer confirms resistance to splash and spillage contact from:
- Petrol and gasoline
- Hydraulic fluids
- Lubricating oils
- Mineral oils
- Other specified industrial chemicals
For long-term intense contact or immersion in petrol, oils and fuels, the manufacturer specifies the use of Primer 100. Chemical resistance depends on the chemical type, concentration, temperature and exposure duration. Always obtain manufacturer confirmation for applications involving continuous immersion or aggressive chemicals.
Technical Information
- Manufacturer: Soudal
- Product: Soudaflex 33SL
- Product type: One-component polyurethane sealant
- Consistency: Self-levelling
- Curing system: Moisture curing
- Packaging: 600ml foil pack
- Colour: Concrete grey
- Density: Approximately 1.35g/ml
- Skin formation: Approximately 60 minutes
- Curing rate: Approximately 2mm per 24 hours
- Maximum joint movement: ±25%
- Shore A hardness: 35 ±5
- Elastic recovery: Greater than 90%
- Elongation at break: Greater than 800%
- Elasticity modulus: Approximately 0.55N/mm²
- Application temperature: +5°C to +40°C
- Service temperature: -30°C to +90°C
- Maximum self-levelling slope: 4%
- Shelf life: 12 months in unopened packaging
- Storage: Between +5°C and +25°C in a cool, dry place
Joint Design and Dimensions
Correct joint preparation is essential to achieve the required sealant performance and movement capability.
- Minimum joint width: 10mm
- Maximum joint width: 40mm
- Minimum joint depth: 10mm
- Recommended joint depth: Approximately 0.8 times the joint width
- Backing material: Closed-cell polyethylene (PE) backing rod to control joint depth
Soudaflex 33SL is self-levelling and must only be used in horizontal joints. It is not suitable for vertical joints.
Application Instructions
1. Substrate preparation
Ensure the substrate is rigid, clean, dry and free from dust, grease and other contaminants. Remove any weak surface material. On cast concrete, remove the cement skin before application.
2. Priming
Porous substrates should be primed with Soudal Primer 100. Always use Primer 100 on natural stone. For non-porous substrates, Soudal Surface Cleaner or the recommended surface preparation treatment may be required. Follow the manufacturer's substrate-specific instructions.
3. Joint preparation
Install a closed-cell PE backing rod to control the depth of the sealant and prevent three-sided adhesion. Ensure the joint dimensions are suitable for the expected movement and the manufacturer's recommendations.
4. Application
Apply Soudaflex 33SL evenly into the horizontal joint using a suitable manual, pneumatic or battery-powered foil-pack applicator. Avoid trapping air within the sealant. Use masking tape where necessary and remove it before the sealant forms a skin.
5. Cleaning
Clean tools and uncured sealant immediately using white spirit or Soudal Surface Cleaner. Once cured, the sealant can only be removed mechanically.
Important Application Limitations
- For horizontal joints only; not suitable for vertical applications.
- Not suitable for PE, PP, PTFE or bituminous substrates.
- Avoid contact with bitumen, tar, EPDM, neoprene, butyl and other plasticiser-releasing materials, as these may cause discolouration or loss of adhesion.
- Do not apply or allow curing in the presence of uncured silicone sealants or alcohol-based and other solvent cleaners.
- Although it has good UV resistance, discolouration may occur following prolonged or extreme UV exposure.
- Chemical resistance varies with chemical concentration, temperature and exposure duration.
- Always carry out preliminary adhesion and compatibility tests where substrate suitability is uncertain.
Standards and Testing
- DIN EN 14187-4: Change in mass and volume following storage in chemical liquids
- DIN EN 14187-5: Resistance to hydrolysis
- DIN EN 14187-6: Adhesion and cohesion properties following storage in chemical liquids
Frequently Asked Questions
What is Soudaflex 33SL used for?
Soudaflex 33SL is used for sealing horizontal expansion, shrinkage and movement joints in concrete floors. It is particularly suitable for garages, workshops, industrial floors and other areas where joints may be exposed to fuels, oils and chemicals.
Is Soudaflex 33SL chemical resistant?
Yes. It offers resistance to many chemicals, including splash and spillage contact from petrol, lubricants, oils and hydraulic fluids. For long-term intense contact or immersion of up to one week, Primer 100 is required in accordance with the manufacturer's instructions.
Can Soudaflex 33SL be used on sloping floors?
Yes. Its self-levelling consistency allows use on suitable horizontal surfaces with gradients of up to 4%, as stated in the current manufacturer's technical data sheet.
Can it be used for vertical joints?
No. Soudaflex 33SL is a self-levelling sealant and is designed for horizontal joints only.
How much movement can Soudaflex 33SL accommodate?
It has a maximum permitted joint movement of ±25%, allowing it to accommodate expansion and contraction in correctly designed floor joints.
How long does Soudaflex 33SL take to cure?
The manufacturer specifies a curing rate of approximately 2mm per 24 hours. Actual curing times depend on temperature, humidity and substrate conditions.
What size joints can Soudaflex 33SL seal?
The manufacturer's technical data sheet specifies a minimum joint width of 10mm, a maximum width of 40mm and a minimum depth of 10mm. The recommended joint depth is approximately 0.8 times the joint width.
Order Soudal Soudaflex 33SL from Clever Shield
Clever Shield supplies Soudal Soudaflex 33SL for contractors, flooring specialists and industrial maintenance applications throughout the UK.
For product enquiries, trade pricing or technical information, contact our team.
Technical Downloads
Important: Clever Shield supplies products and materials only and does not design or specify flooring or joint-sealing systems. Customers must establish product suitability for their particular project and follow the latest manufacturer technical data sheets, preparation instructions and safety information.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security

You may also be interested in
Recently viewed
What Our Customers Say
Very good 4.7/5
Exceptional Advice & Support
Hands down in all of my reviews I've done in 21+ years, Clever Shield Coatings is one I'll always remember as the staff are friendly & passionate about their job - looking out for the customer and getting the job done right first time.
Sunny
Verified customer
Fast, friendly and reliable…
Fast, friendly and reliable. I was able to get my job done quickly and my customer was happy with the prices.
Thanks.
Kamil
Verified customer
Exceptional Advice & Support
We have been using clever shield (dealing with Richard) for over 2 years. They always give good service deliveries on time and even give technical advise when needed.
JAC
Verified customer
Really helpful! great service
Spoke to technical for some advice on the product and it was really helpful, great service
Tina Mansfield
Verified customer
Great company / knowledgeable
What a great company - knowledge about the products, spent lots of time talking me through everything - if only every company was like this one !
Ostler Info
Verified customer
Great company and speedy delivery
Really great company to deal with,excellent customer service,speedy delivery will definitely recommend and use again as a satisfied customer
Del Upson
Verified customer
Great Technical Support
Great technical support and advice on wykamol products would highly recommend this company
Shirley
Verified customer
Highly Recommended
Sandra Dow
Verified customer

