Fire resistant hand held PU foam
HIGH YIELD fire rated, one component expanding polyurethane foam filler. 25% more yield than standard Soudafoam FR fire resisting foam. Rapid curing. Excellent thermal and acoustic insulation properties. Expands 35-40 times its initial volume. Excellent primerless adhesion on most construction materials. Conforms to all international standards.
Open technical data sheet
Properties
- Fire rated polyurethane expanding foam filler
- EN13501-2 – Reaction to fire, class E
- EN1366-4 – Fire resistance, up to 4 hours depending on joint configuration
- More than 25% linear yield than Soudafoam FR
- Very good acoustic properties
TDS
Open technical data sheet
Instructions
Shake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. For non-conventional substrates a preliminary adhesion test is recommended. Remove pressure from the applicator to stop. Fill holes and cavities for 1/3, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foamcleaner or acetone. Prior to using the Gun & Foamcleaner, test whether surfaces are affected or not. Especially plastics and lacquer or paint layers can be sensitive to this. Cured foam can only be removed mechanically or with Soudal PU-Remover.
Applications
- For use in passive fire protection systems as a large gap filler
- installation of fire retardant window and door frames
- sealing of expansion and connection joints