ULTRADRY Bicomponent Epoxy Floor Resin - Pallet Rates

ULTRADRY Bicomponent Epoxy Resin – Pallet Rate Moisture Control

ULTRADRY is a high-performance, two-component epoxy resin designed for direct application to wet substrates where residual moisture would otherwise delay construction work. Formulated for professional use, it absorbs moisture and provides a strong, reliable moisture barrier to support waterproofing or flooring systems. :contentReference[oaicite:1]{index=1}

• Best for: moisture control on wet concrete, mortar and ceramic substrates
• Compatible with: ULTRAFLEX liquid waterproofing systems and coatings
• Uses: internal/external waterproofing, flooring prep, tanking, lift shafts and swimming pools

Key Benefits

• Moisture absorption: can be applied on substrates with high residual humidity (up to ~98%). :contentReference[oaicite:2]{index=2}
• Pressure resistance: resists positive and negative pressure, supporting a durable moisture barrier. :contentReference[oaicite:3]{index=3}
• Fast drying: dries in approximately 2–4 hours, helping accelerate project schedules. :contentReference[oaicite:4]{index=4}
• Easy application: single-layer application with roller or trowel. :contentReference[oaicite:5]{index=5}
• 100% solids & solvent-free: odourless, professional-grade epoxy formulation. :contentReference[oaicite:6]{index=6}
• Strong adhesion: bonds effectively to porous surfaces such as concrete and ceramics. :contentReference[oaicite:7]{index=7}

Where ULTRADRY Is Used

ULTRADRY epoxy resin is ideal where moisture management is critical before installing final waterproofing or flooring systems. It provides a dependable base layer on damp substrates and is widely used in professional construction environments with high humidity and pressure conditions. :contentReference[oaicite:8]{index=8}

• Wet concrete and ceramic surfaces
• Swimming pools and lift pits
• Internal and external tanking
• Surfaces prior to flooring or waterproof coatings
• Roofing and structural waterproofing prep

Specifications

• Pack size: 15kg kit (Component A: ~12kg + Component B: ~3kg) :contentReference[oaicite:9]{index=9}
• Coverage: approximately 200–500 g/m² depending on substrate conditions :contentReference[oaicite:10]{index=10}
• Maximum humidity tolerance: up to ~98% :contentReference[oaicite:11]{index=11}
• Drying time: ~2–4 hours (varies with conditions) :contentReference[oaicite:12]{index=12}
• Pot life: ~1 hour :contentReference[oaicite:13]{index=13}
• Application temperature range: +2°C to +35°C :contentReference[oaicite:14]{index=14}
• Shelf life: approx. 12 months when stored sealed and dry :contentReference[oaicite:15]{index=15}

Installation Overview

1. Prepare: ensure the substrate is sound, flat, and free from debris or materials that hinder adhesion. :contentReference[oaicite:16]{index=16}
2. Mix: combine Component B into Component A and mix thoroughly to a consistent colour. :contentReference[oaicite:17]{index=17}
3. Apply: spread a single coat by roller or notched trowel over the moist surface. :contentReference[oaicite:18]{index=18}
4. Level: while wet, smooth the surface for the desired planimetry in preparation for subsequent systems. :contentReference[oaicite:19]{index=19}

Tip: For technical support or accurate coverage estimates, call 01268 472358.

What You Get

• ULTRADRY Bicomponent Epoxy Resin supplied at pallet rates (bulk ordering)
• Designed for moisture control and substrate conditioning prior to coatings or flooring systems
• Professional glue-like bond to porous substrates

Quick FAQs

Media & Downloads

Need advice? Call 01268 472358 for product selection or technical support.