Mapefloor Finish 58 W – Polyurethane Finish
Mapefloor Finish 58 W is a two-component, aliphatic, water-based polyurethane finish designed to provide a transparent, protective coating for resin and cementitious flooring systems. It improves resistance to abrasion and scratching while helping to limit dirt pick-up and simplify routine cleaning and maintenance.
The finish is suitable for Mapefloor resin systems, Ultratop systems and concrete surfaces, providing a low-odour solution that can be used in internal environments. Mapefloor Finish 58 W is also suitable for use where a matt, non-yellowing finish is required.
Key Benefits
- Matt Transparent Finish – Provides a clean, understated finish without a high-gloss appearance.
- Two-Component Polyurethane – Supplied as pre-dosed Component A and Component B.
- High Abrasion Resistance – Helps protect finished flooring from everyday wear.
- Scratch Resistant – Improves resistance to scratching on resin and cementitious floors.
- Non-Yellowing – Formulated to maintain its appearance over time.
- Water-Based – Water dispersion formulation with low odour during application.
- Easy to Apply – Suitable for application by mohair roller or airless spray.
- Reduced Dirt Pick-Up – Helps make routine cleaning and maintenance easier.
- Optional Anti-Slip Finish – Mapefloor Filler can be added where a non-slip finish is required.
Applications
Mapefloor Finish 58 W can be used as a protective matt finish for:
- Mapefloor System 33
- Mapefloor System 53
- Mapefloor Comfort Systems
- Ultratop
- Ultratop Living
- Ultratop Loft
- Concrete floors
- Resin flooring systems
- Cementitious decorative flooring
When applied to concrete, Mapefloor Finish 58 W complies with the relevant surface protection principles of EN 1504-2, including moisture control and increasing resistivity by limiting moisture content.
Technical Information
- Product type: Two-component aliphatic polyurethane finish
- Base: Water dispersion
- Finish: Transparent, matt
- Mixing ratio: Component A : Component B = 10:1
- Application: Mohair roller or airless spray
- Consumption: 0.1–0.2 kg/m² per coat, depending on substrate roughness and porosity
- Packaging: 5.5kg kit (A+B)
- Component A: 5kg
- Component B: 0.5kg
- Gloss: Approximately 10 at 60°
- Foot traffic: Approximately 12 hours at +23°C and 50% RH
- Complete hardening: Approximately 7 days at +23°C and 50% RH
- Storage: 12 months in original packaging at +12°C to +30°C
- Certification: CE marked to EN 1504-2, principles MC-IR.
Frequently Asked Questions
What is Mapefloor Finish 58 W used for?
It is a protective matt polyurethane finish for resin floors, Ultratop cementitious flooring systems and concrete surfaces.
What coverage does Mapefloor Finish 58 W provide?
The stated consumption is approximately 0.1–0.2kg/m² per coat, depending on the roughness and porosity of the substrate.
How is Mapefloor Finish 58 W applied?
It can be applied using a short-piled mohair roller or airless spray system. One or two coats may be applied depending on the flooring system and required finish.
Can Mapefloor Finish 58 W provide a non-slip finish?
Yes. Mapefloor Filler can be added during mixing to produce a non-slip surface finish.
Can it be applied over concrete?
Yes. Mapefloor Finish 58 W can be applied to new or existing concrete provided the surface is suitably prepared, clean and free from contaminants. Mapei specifies preparation and pore-sealing requirements before application to concrete.
