Description
MAPESIL 300°C – High Temperature Acetic Silicone Sealant
MAPESIL 300°C is a flexible, acetic-curing silicone sealant developed for sealing joints and connections exposed to continuous high operating temperatures of up to 300°C. Formulated with specialist heat-resistant fillers, it maintains flexibility under thermal stress and is suitable for applications involving flues, chimneys, boilers, ovens, radiators and high-temperature pipework.
Once fully cured, MAPESIL 300°C provides a flexible, durable seal with resistance to thermal shock, smoke, oils, lubricants and fuels. It is suitable for professional industrial and domestic applications where a conventional silicone sealant may not withstand the operating temperature.

Key Benefits
- Withstands continuous operating temperatures up to +300°C
- Flexible seal accommodating up to 20% movement in service
- Resistant to thermal shock and smoke
- Resistant to oils, lubricants and fuels
- Good resistance to water and excellent resistance to atmospheric agents
- Suitable for flues, chimneys, ovens, boilers, radiators and high-temperature pipework
- Black finish for discreet sealing
- Easy application using a standard sealant extrusion gun
Typical Applications
- Sealing joints and connections around chimneys and flues
- Industrial and domestic ovens and furnaces
- Boilers and heating equipment
- Radiators and heat exchangers
- Barbecues and other heat-generating equipment, where the seal is not exposed to direct flames
- High-temperature pipework and conduits
- External motor assemblies fitted to heaters and boilers
Technical Data
| Product | MAPESIL 300°C |
| Manufacturer | Mapei |
| Composition | Acetic-curing silicone |
| Appearance | Thixotropic paste |
| Colour | Black |
| Density | 1.4 g/ml |
| Movement in service | 20% |
| Modulus of elasticity at 100% elongation | 0.60 N/mm² |
| Shore A hardness | 20 |
| Elongation at failure | 500% |
| Tensile strength | 2.2 N/mm² |
| Tear strength | 5 kN/m |
| Skin formation time | Approximately 6 minutes at +23°C and 50% RH |
| Polymerisation rate | Approximately 4mm per 24 hours |
| Application temperature | +5°C to +35°C |
| In-service temperature | -30°C to +300°C |
| Consumption | Approximately 3 linear metres per 300ml cartridge at a 10mm x 10mm joint section |
| Packaging | 300ml cartridges – supplied in boxes of 12 |
| Storage life | 18 months in original sealed packaging, stored between +5°C and +25°C |
Surface Preparation and Application
Surfaces must be dry, solid, clean and free from dust, loose material, oil, grease, wax, old paint and rust. Non-absorbent, non-oxidising surfaces should be thoroughly cleaned and degreased before application.
On absorbent alkaline surfaces, Mapei recommends applying the appropriate primer, as detailed in the current manufacturer technical data sheet.
- Apply only when the substrate and surrounding conditions are within the recommended application temperature range of +5°C to +35°C.
- Do not apply to damp surfaces, surfaces with standing water, dusty or friable substrates.
- Do not apply to surfaces hotter than +35°C.
- Insert the cartridge into a suitable extrusion gun and apply a continuous bead into the joint, avoiding trapped air.
- Smooth the sealant immediately after application using a spatula wetted with soap and water.
- Remove masking tape immediately after smoothing.
- Allow the sealant to cure fully at room temperature before exposing it to high operating temperatures.
Important Application Limitations
- MAPESIL 300°C is not suitable for direct contact with flames.
- Do not use as a substitute for a fire-rated penetration or fire-stopping system.
- Do not expose the sealant to high temperatures until it has fully hardened throughout its section.
- The product cannot be painted over.
- Do not apply to damp, dusty or unstable surfaces.
Where direct flame exposure or a certified fire-stopping solution is required, consult Mapei for a suitable alternative such as MAPEFLEX FIRESTOP 1200°C or another appropriate fire-rated product.
Frequently Asked Questions
What temperature can MAPESIL 300°C withstand?
MAPESIL 300°C is designed for continuous operating temperatures from -30°C to +300°C once fully cured. It must not be exposed to high temperatures before the sealant has hardened completely.
Can MAPESIL 300°C be used around chimneys and flues?
Yes. It is specifically developed for flexible sealing joints and connections on chimneys, flues, boilers and high-temperature pipework. It must not be used where it will be in direct contact with flames.
How long does MAPESIL 300°C take to cure?
The manufacturer states a polymerisation rate of approximately 4mm per 24 hours. Actual curing time depends on joint dimensions and site conditions. The sealant must be fully hardened throughout its section before exposure to high temperatures.
How much does one 300ml cartridge cover?
One 300ml cartridge provides approximately 3 linear metres of sealant when applied to a 10mm x 10mm joint section. Actual consumption will vary according to joint dimensions.
Can MAPESIL 300°C be painted?
No. Mapei specifically states that MAPESIL 300°C must not be painted over.
Technical Downloads
Refer to the manufacturer's latest technical and safety documentation before application.
Supply from Clever Shield Coatings UK
Clever Shield supplies genuine Mapei products to trade professionals, contractors and customers throughout the UK. MAPESIL 300°C is available in 300ml cartridges, supplied in boxes of 12.
For product enquiries or assistance with availability, contact our team:
Telephone: 01268 472358
Email: sales@clevershieldcoatings.co.uk
Important: Clever Shield Coatings UK supplies products only and does not design or specify systems. Customers must establish product suitability for their intended application and follow the latest manufacturer technical and safety documentation.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security

You may also be interested in
Recently viewed
What Our Customers Say
Very good 4.7/5
Exceptional Advice & Support
Hands down in all of my reviews I've done in 21+ years, Clever Shield Coatings is one I'll always remember as the staff are friendly & passionate about their job - looking out for the customer and getting the job done right first time.
Sunny
Verified customer
Fast, friendly and reliable…
Fast, friendly and reliable. I was able to get my job done quickly and my customer was happy with the prices.
Thanks.
Kamil
Verified customer
Exceptional Advice & Support
We have been using clever shield (dealing with Richard) for over 2 years. They always give good service deliveries on time and even give technical advise when needed.
JAC
Verified customer
Really helpful! great service
Spoke to technical for some advice on the product and it was really helpful, great service
Tina Mansfield
Verified customer
Great company / knowledgeable
What a great company - knowledge about the products, spent lots of time talking me through everything - if only every company was like this one !
Ostler Info
Verified customer
Great company and speedy delivery
Really great company to deal with,excellent customer service,speedy delivery will definitely recommend and use again as a satisfied customer
Del Upson
Verified customer
Great Technical Support
Great technical support and advice on wykamol products would highly recommend this company
Shirley
Verified customer
Highly Recommended
Sandra Dow
Verified customer

