Description
Siramiguard Acryseal Water-Based Concrete Sealer – Clear
Siramiguard Acryseal is a single-component, water-based polymeric concrete sealer designed to protect and seal concrete floors, walls and other suitable cementitious surfaces. It forms a durable polymer coating that provides UV stability and resistance to foot and automotive traffic.
Suitable for residential, commercial and industrial concrete applications, Acryseal provides a clear protective finish and can also be painted over with emulsion paints. Its solvent-free, low-odour formulation can be applied by airless spray, brush or roller, making it suitable for a range of concrete sealing projects.
Acryseal is a self-cross-linking polymeric membrane coating. It is supplied ready to use as a single-component product, with no separate hardener or reducer required.

Key Features and Benefits
- Water-based formulation: Single-component polymeric coating.
- Concrete protection: Designed to seal concrete floors, walls and other cementitious surfaces.
- Traffic resistance: The manufacturer describes the coating as highly durable against foot and automotive traffic.
- UV stable: Provides resistance to UV exposure.
- Crack bridging: The manufacturer states crack-bridging capability of up to 3mm.
- Flexible coating: Forms a polymer coating for suitable concrete substrates.
- Paintable: Can be painted over with emulsion paints.
- Solvent-free and low odour: Suitable where a lower-odour coating is preferred.
- Multiple application methods: Suitable for airless spray, brush and roller application.
- Single component: No separate curing agent or mixing ratio required.
- Temperature resistance: Manufacturer-stated resistance from -20°C to +180°C.
- Application from 5°C: The product description states that it can be applied at temperatures down to 5°C, subject to the full substrate and environmental requirements.
Intended Applications
Siramiguard Acryseal is designed for sealing suitable concrete and cementitious substrates, including:
- Concrete floors and walls.
- Commercial and industrial concrete areas.
- Warehouses and workshops.
- Garages and suitable concrete traffic areas.
- Concrete surfaces requiring a protective polymer coating.
- Cementitious substrates.
- Suitable paintable joint sealants and expanded foams.
- Concrete surfaces where a clear, paintable sealer is required.
The manufacturer identifies suitability for concrete and cementitious substrates and use over paintable joint sealants and expanded foams. Confirm compatibility with the actual substrate and existing coatings before application.
Technical Information
| Product | Siramiguard Acryseal |
| Manufacturer | Performance Polymers Group |
| Product chemistry | Water-based polymeric sealant |
| Product type | Single-component polymeric concrete sealer |
| Colour | Clear |
| Specific gravity | Approximately 1.05g/ml |
| Volume solids | 50% ± 2% |
| VOC | VOC-free, as stated in the manufacturer's TDS |
| Typical dry film thickness | 50μm per coat |
| Dry film thickness range | 50–100μm |
| Wet film thickness | 100–200μm |
| Theoretical spreading rate | 10m²/litre at 50μm DFT |
| Spreading rate at 100μm DFT | 5.3m²/litre |
| Application methods | Airless spray, brush and roller |
| Application temperature | Product description states down to 5°C; see substrate and environmental limits below |
| Temperature resistance | -20°C to +180°C |
| Crack bridging | Up to 3mm, as stated by the manufacturer |
| Packaging stated in TDS | 20-litre pails |
Coverage and Material Consumption
The manufacturer's technical data sheet provides the following theoretical spreading rates:
- 50μm dry film thickness: Approximately 10m² per litre.
- 100μm dry film thickness: Approximately 5.3m² per litre.
These are theoretical figures. Actual coverage will depend on substrate condition, surface profile, porosity, application method and the specified coating thickness. Allow for additional material where the substrate is uneven or more absorbent.
Recommended Coating Build-Up
The manufacturer's typical system describes a one- or two-coat application for sealing concrete substrates. The two-coat system is specified as follows:
- First coat: Siramiguard Acryseal at 50μm dry film thickness.
- Second coat: Siramiguard Acryseal at 50μm dry film thickness.
For a two-coat system, the specified total dry film thickness is approximately 100μm. Follow the manufacturer's guidance for the intended substrate and application.
Surface Preparation
Correct surface preparation is essential for coating adhesion and performance.
- Substrates must be clean and dry.
- Remove oil, dirt, grease, dust and all other foreign materials before coating.
- Ensure the surface is sound and suitable for the proposed coating.
- Check previously coated or treated surfaces for compatibility before application.
Application Conditions
The Acryseal technical data sheet specifies the following application conditions:
- Substrate temperature: 5°C to 50°C.
- The substrate temperature must remain at least 3°C above the dew point.
- Relative humidity: 35–85% during application.
- Do not apply outside the manufacturer's stated environmental limits.
Application Instructions
- Acryseal is a single-component product. Mechanically mix at low speed using a plastic paddle before application.
- Apply by airless spray, conventional air spray, brush or roller.
- Do not add reducer or thinner. The manufacturer's TDS specifies that thinning is not required.
- Keep the container covered when not in use to help prevent skinning.
- Apply the specified coating thickness and allow the required drying time between coats.
- Clean equipment with water after use and dispose of waste in accordance with local environmental regulations.
Application Equipment – Airless Spray
| Pump ratio | 30:1 or higher |
| Tip size | 0.015–0.017 inch |
| Pressure | Below 140 bar / 2031 psi |
| Hose diameter | Greater than 1/2 inch |
| Thinning | Not required |
Drying and Overcoating Times
| Temperature | Touch dry | Overcoating time |
| 10°C | 6 hours | 24 hours |
| 23°C | 3 hours | 16 hours |
| 38°C | 1 hour | 8 hours |
Drying and overcoating times are manufacturer-stated values and can vary with environmental conditions. The manufacturer states that there is no time limitation for overcoating, including after exposure to elevated temperatures, subject to the product instructions.
Storage and Shelf Life
The manufacturer's technical data sheet states a minimum shelf life of 12 months at 23°C. Store in a dry, shaded environment away from heat and ignition sources. Do not allow the material to freeze.
Frequently Asked Questions
1. What is Siramiguard Acryseal used for?
Siramiguard Acryseal is a water-based polymeric sealer for concrete floors, walls and other suitable cementitious substrates. It forms a protective coating designed to resist UV exposure and foot and automotive traffic.
2. Is Siramiguard Acryseal water-based?
Yes. The manufacturer's technical data sheet identifies Acryseal as a water-based polymeric sealant. It is also described as solvent-free and VOC-free.
3. What is the coverage of Siramiguard Acryseal?
The theoretical spreading rate is approximately 10m² per litre at 50μm dry film thickness, or 5.3m² per litre at 100μm dry film thickness. Actual coverage depends on the substrate and application conditions.
4. How many coats of Acryseal should be applied?
The manufacturer describes a typical one- or two-coat system. Its two-coat example specifies 50μm dry film thickness per coat, giving approximately 100μm total dry film thickness.
5. Can Acryseal be applied by roller or brush?
Yes. The manufacturer lists airless spray, brush and roller as suitable application methods.
6. Can Siramiguard Acryseal bridge cracks?
The manufacturer states that the polymer coating can withstand crack bridging up to 3mm. This should not be interpreted as approval to bridge every active structural crack or movement joint without suitable detailing.
7. How long does Acryseal take to dry?
At 23°C, the manufacturer gives a touch-dry time of approximately 3 hours and an overcoating time of 16 hours. Drying times vary with temperature and environmental conditions.
8. Can Acryseal be painted over?
Yes. The manufacturer states that Acryseal can be painted over with emulsion paints. Check the compatibility of the proposed paint and follow the relevant manufacturer's instructions.
Technical Downloads
Read the manufacturer's technical documentation and applicable safety information before using the product.
Supplied by Clever Shield Coatings UK
Clever Shield supplies specialist concrete protection, waterproofing and coating products to trade professionals, contractors and customers throughout the UK.
Important: Clever Shield is a product supplier and does not provide project-specific waterproofing design or specification. Customers must assess substrate suitability and follow the manufacturer's current technical data sheet, application instructions and safety documentation. Where product compatibility or suitability is uncertain, obtain confirmation from the manufacturer or a suitably qualified design professional.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security

You may also be interested in
Recently viewed
What Our Customers Say
Very good 4.7/5
Exceptional Advice & Support
Hands down in all of my reviews I've done in 21+ years, Clever Shield Coatings is one I'll always remember as the staff are friendly & passionate about their job - looking out for the customer and getting the job done right first time.
Sunny
Verified customer
Fast, friendly and reliable…
Fast, friendly and reliable. I was able to get my job done quickly and my customer was happy with the prices.
Thanks.
Kamil
Verified customer
Exceptional Advice & Support
We have been using clever shield (dealing with Richard) for over 2 years. They always give good service deliveries on time and even give technical advise when needed.
JAC
Verified customer
Really helpful! great service
Spoke to technical for some advice on the product and it was really helpful, great service
Tina Mansfield
Verified customer
Great company / knowledgeable
What a great company - knowledge about the products, spent lots of time talking me through everything - if only every company was like this one !
Ostler Info
Verified customer
Great company and speedy delivery
Really great company to deal with,excellent customer service,speedy delivery will definitely recommend and use again as a satisfied customer
Del Upson
Verified customer
Great Technical Support
Great technical support and advice on wykamol products would highly recommend this company
Shirley
Verified customer
Highly Recommended
Sandra Dow
Verified customer

