Description
VB Steel Plate Waterstop – Concrete Construction Joint Waterproofing
VB Steel Plate Waterstop is a specialist waterproofing component designed to help seal non-movement construction joints in reinforced concrete structures. It consists of a galvanised steel plate encapsulated in a reactive coating that activates when it comes into contact with the moisture and alkalinity of fresh concrete.
Designed for use in reinforced concrete construction, this steel plate waterstop creates a barrier within the joint between concrete pours, helping to prevent water penetration. It is suitable for applications including insulated concrete formwork (ICF), twin-wall construction, basements and other underground concrete structures.

Key Features and Benefits
- Reinforced Concrete Joint Sealing: Designed for non-movement construction joints in reinforced concrete.
- Galvanised Steel Plate: Steel plate encapsulated in a reactive coating.
- BBA Certified: Covered by BBA Certificate 15/5194.
- Water Pressure Resistance: Independently tested to withstand water pressure up to 5 bar, with a 2.5 safety factor.
- 30mm Concrete Cover: Requires a minimum 30mm concrete cover for the specified application.
- Reactive Coating: Activates through contact with the moisture and alkalinity of fresh concrete.
- Vertical and Horizontal Installation: Suitable for both orientations of non-movement concrete construction joints.
- Flexible Installation: Can be fixed to reinforcement before concrete placement or inserted into freshly poured concrete.
- Weather Resistant: Does not require protection from rain before installation.
- No Welding Required: Installed without welding or specialist fitting equipment.
Typical Construction Applications
- Reinforced concrete construction joints.
- Basement wall and floor joints.
- Insulated concrete formwork (ICF) construction.
- Twin-wall concrete construction.
- Horizontal concrete pour joints.
- Vertical concrete construction joints.
- Underground reinforced concrete structures.
- Water-retaining concrete structures.
How the Steel Plate Waterstop Works
The galvanised steel plate forms a physical barrier within the concrete construction joint. Its reactive coating activates when exposed to the moisture and alkalinity of fresh concrete.
Following activation, the coating develops crystallisation properties that help seal cracks and capillary pathways in the surrounding concrete, reducing the potential for water penetration through the construction joint.
The coating can reactivate when exposed to moisture again, supporting the long-term sealing performance of the concrete joint.
Installation
The steel plate waterstop can be installed using either of the following methods, in accordance with the manufacturer's installation instructions:
- Before Concrete Pouring: Secure the steel plate to the reinforcement using the appropriate Omega Holders before the concrete is poured.
- Into Fresh Concrete: Insert the plate into freshly poured concrete to the specified embedment depth.
- Concrete Cover: Ensure a minimum 30mm concrete cover as specified by the manufacturer.
- Plate Overlaps: Provide a minimum 150mm overlap at plate joints and secure using the specified fixing components.
- Cutting and Detailing: The plate can be cut to length and shaped for suitable joint details using an appropriate cutting tool.
Always follow the manufacturer's current installation instructions and ensure the waterstop is correctly positioned and secured before the next concrete pour.
Product Specifications
- Manufacturer: Triton Systems
- Product: VB Steel Plate Waterstop
- Product Type: Concrete construction joint waterstop
- Base Material: Galvanised steel plate
- Coating: Reactive coating
- Length: 2m
- Width: 100mm
- Thickness: 1.25mm
- Minimum Concrete Cover: 30mm
- Minimum Plate Overlap: 150mm
- Tested Water Pressure: Up to 5 bar
- Certification: BBA Certificate 15/5194
- Application: Non-movement reinforced concrete construction joints
Frequently Asked Questions
What is a VB Steel Plate Waterstop used for?
It is designed to help prevent water penetration through non-movement construction joints in reinforced concrete structures.
Can it be used in ICF construction?
Yes. It is suitable for insulated concrete formwork (ICF) and twin-wall concrete construction, subject to the required installation clearances.
How much concrete cover is required?
The manufacturer specifies a minimum concrete cover of 30mm for the intended application.
Can it be installed before concrete is poured?
Yes. It can be secured to the reinforcement before pouring or inserted directly into freshly poured concrete using the specified installation method.
What water pressure has it been tested to withstand?
The product has been independently tested for water pressure resistance up to 5 bar, with a 2.5 safety factor.
Does the plate require welding?
No. The system is designed for installation without welding, using the appropriate fixing components and installation method.
Technical Datasheet
For technical information, installation requirements and product guidance, refer to the manufacturer's documentation.
Installation Video
Order VB Steel Plate Waterstop from Clever Shield
Shop construction joint waterproofing products from Clever Shield, supplying waterproofing and building protection materials to trade professionals and customers throughout the UK.
Product Supply Notice: Clever Shield supplies construction waterproofing products and materials. We do not undertake project design or specify products for individual buildings. Customers should establish product suitability for their application and follow the manufacturer's current technical documentation and installation guidance.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security

You may also be interested in
Recently viewed
What Our Customers Say
Very good 4.7/5
Exceptional Advice & Support
Hands down in all of my reviews I've done in 21+ years, Clever Shield Coatings is one I'll always remember as the staff are friendly & passionate about their job - looking out for the customer and getting the job done right first time.
Sunny
Verified customer
Fast, friendly and reliable…
Fast, friendly and reliable. I was able to get my job done quickly and my customer was happy with the prices.
Thanks.
Kamil
Verified customer
Exceptional Advice & Support
We have been using clever shield (dealing with Richard) for over 2 years. They always give good service deliveries on time and even give technical advise when needed.
JAC
Verified customer
Really helpful! great service
Spoke to technical for some advice on the product and it was really helpful, great service
Tina Mansfield
Verified customer
Great company / knowledgeable
What a great company - knowledge about the products, spent lots of time talking me through everything - if only every company was like this one !
Ostler Info
Verified customer
Great company and speedy delivery
Really great company to deal with,excellent customer service,speedy delivery will definitely recommend and use again as a satisfied customer
Del Upson
Verified customer
Great Technical Support
Great technical support and advice on wykamol products would highly recommend this company
Shirley
Verified customer
Highly Recommended
Sandra Dow
Verified customer







