Wykamol Membrane Tapes and Plugs

The most important part of any membrane systems, are the fixings and jointing tapes.

These tapes and fixings are part of the BBA accredited waterproofing systems we supply.

Our Plaster Plugs and Brick Plugs are also of the highest quality, and now include the new plugs with seals already attached to speed up installation times. For poor quality constructions, we have the Wykamol Cob Plug, which can be installed into all types of masonry to enable good fixing.

CM Brick Plugs

Wykamol CM Brick Plugs are used to apply cavity drain membranes to the walls of both above and below ground applications. CM brick Plugs are of a high quality and can be used in a range of applications and on multiple substrate types. The tailor made Thermoplastic Elastomer seal ensures application of the membrane is water tight.

Wykamol CM Brick Plugs can be used:

• To apply cavity drainage membranes such as CM3, CM8 and CM20
• On Brick
• One Stone
• On Concrete
• In damp-proofing applications
• In waterproofing applications

CM Brick Plugs come both with and without seals.

Plug Seals can also be purchased separately.

CM Plaster Plugs with Seals

These Plaster Plugs can be used with our mesh membrane systems. They are available in 70mm lengths and have the advantage of a seal already attached. They have a serrated head which can take plaster or dot and dab. They can also be used to secure membranes to walls in systems where a free standing frame is to be used.

Surefix Brick Plugs

Wykamol Surefix are 10mm fixings to use with membrane systems. They have a reinforced head for easy use and take a size 10 screw into the head of the plug, for battens or metal framing systems. At 60mm long, these plugs will fit into all substrates.

Cob Plugs

These plugs are ideal to use where substrates will not take a normal fixing. They are ideal for cob construction as well as all other masonry types. They have a pin which is driven down the head of the plug to give a secure anchor for membrane systems. Available sizes are 60, 90, 110 and 130mm long.

Jointing Systems

Quality jointing systems are critical when using cavity membrane systems. We offer the highest quality jointing tapes and ropes within the waterproofing industry.

All our tapes and ropes are covered by a extensive BBA accreditation and all the materials are of the highest quality using HP 600 grade bitumen.

All the products within the jointing range have undergone extensive water testing capabilities and are suitable for use with our high-density polyethylene membranes. When specifying these products you can rest assured that each of these tapes will last and remain flexible throughout the life of the waterproofing project.

Tape

A high quality butyl double sided tape, 28mm wide. This tape is used in the installation of Wykamol cavity drain membranes and is used to tape 2 sheets of membrane together on walls or floors. Easy to use and very high quality HP600 grade bitumen makes this a long term solution for all membrane work.

Rope

A 10mm bead of butyl rope. This rope is used to either wrap around the head of plugs in membrane installation, or to form a jointing waterproof seal on walls and floor membrane systems. This is a high quality rope and is covered by a BBA Certificate.

Corner

Our biggest selling tape, this 150mm wide tape has many uses, but is mostly used to seal membrane from walls to floors and the channel system. Tacky on one side only, this can also be used to overtape external joints and can also be used on floor oversealing.

Overseal

This is a 75mm overseal tape used to overseal membrane systems, it can be used on walls and floors and forms an overseal detail to form a vapour barrier and waterproof seal on external taped joints. Covered by a BBA Certificate.

Fibre Tape

Wykamol Fibre Tape is used to join plaster membranes together. The unique fibre backing allows for direct plaster or dot-and-dab situations. The fibre also stops any cracking of plaster on these joints.