Ultracure cream is delivered by hand pressure from the appropriately sized applicator gun into a series of holes drilled into the mortar course.
From here, Ultracure© effectively migrates into the masonry pores and fully passivates across the mortar joint as the cream reverts to a liquid phase. Upon curing, a hydrophobic chemical damp-proof barrier is formed in-situ. Extensive field experience with this technology demonstrates that Ultracure© will perform as well as any conventional liquid injection system against rising damp.
Ultracure© cream is designed to control rising damp, but walls can remain damp after a DPC installation where they are severly contaminated with hydroscopic salts. Replastering with an appropriate, salt resistant product, such as Renovation Plaster or Renderproof, is essential to prevent further damage to the plaster finish. In all cases the damp-proof course should, as far as possible, be installed in accordance with British Standard ‘Code of Practice for Installation of Chemical Damp Proof Courses’ BS6576:2005.
Ultracure© is a unique silane based emulsion cream for injection into brickwork for the control of rising dampness. ISSUE 5 - MC0320
Walls, Damp-proofing applications.
- Effective for at least 20 years
- BBA approved
- No high pressure injection pump needed
- No pump cleaning between jobs
- Can be used in conjunction with dampstop mesh membrane kit
- Finish with renderproof or renovation plaster
- Easy, fast and clean installation
- Virtually odourless
- Can be used in all types of masonry
- Precise dosing and Low hazard