Fast drying flexible liquid tanking membrane for interior use
Ready to use
Easy to apply
Ideal for bathrooms, showers etc
Flexible and tough
Solvent free
Apply before the installation of tiles or stone
Tile after 12 hours
Use on: Plasterboard, gypsum or cementitious render Suitable tilebacker boards Cementitious and anhydrite substrates Over existing tiles and stone
Colour:Light grey
Coverage:Aprrox 1.2kg per m2 for two coats
Time between coats:Approx 60 min (touch dry)
Sizes available:5kg, 10kg and 20kg units
Application Instructions:
To ensure a continuous waterproofing layer, we recommend using a rubber tape such as Mapeband, Mapeband PE 120, or Mapeband Easy to create elastic joints between the wall and floor, as well as between adjacent walls, before applying Mapegum WPS.
The rubber tape (Mapeband, Mapeband PE 120, or Mapeband Easy) should be securely bonded to the substrate using Mapegum WPS.
Mapegum WPS can be applied using a trowel, roller, brush, or spray equipment (if necessary, dilute with up to 5% water).
Apply Mapegum WPS in thin, even coats. Allow the first coat to dry fully before applying subsequent coats in a crosswise direction (approximately 1-2 hours, depending on temperature conditions).
The final application of Mapegum WPS should achieve a minimum thickness of 0.8 mm (equivalent to a dry thickness of 0.5 mm) to form a consistent, flexible waterproof layer.
Ensure that the substrate is free from imperfections that could create gaps in the coating.
