Master Builders - MasterTop P 617 Primer for MasterSeal Polyurea

Description

A general purpose, non-solvented, two component epoxy resin based primer, suitable also to surfaces in contact with the ground. (*) * on condition that a damp proof membrane was properly installed. 

MasterTop® P 617 is a non-solvented (total solid), low viscosity, two component epoxy resin based primer.

For use with MasterSeal M860 & M861 Polyurea

DESCRIPTION

MasterSeal M860 and M861 are hand applied, nonsolvented, 2-component, elastomeric polyurea coatings.

MasterSeal M860 is self-levelling.

MasterSeal M861 is thixotropic for applications to steeply sloping and vertical surfaces.

FIELD OF APPLICATION

MasterSeal M860 and M861 are used in a variety of concrete waterproofing applications including roofing, balconies, terraces, podium decks, car park decks and water industry applications.

Two-part, hand-applied, rapid-curing, hydrophobic and chemically resistant polyurea waterproofing membrane

When you have essential waterproofing requirements or repairs and need to get facilities back into service as quickly as possible, a fast-track waterproofing membrane can save money. MasterSeal is a two-part, hand-applied, rapid-curing polyurea membrane that enables structures to be recommissioned with minimal downtime. It provides long lasting waterproofing with high elasticity for thermal movement. As a seamless coating (no joints or overlaps) there is no risk of leaky joints with excellent crack-bridging and chemical resistance. 

MasterSeal - Polyurea can be easily and seamlessly applied by brush, roller or squeegee.

FEATURES AND BENEFITS

• Monolithic – no laps, welds or seams
• Fully bonded
• High water vapour permeability
• Excellent mechanical properties
• Excellent crack bridging capability
• Resistant to puncture
• Resistant to standing water
• Mhermoset – does not soften at high temperatures
• Remains elastic at low temperatures eg approx. - 45ºC
• Non-solvented
• ​Rapid curing: accepts light foot traffic after 4 hours at 20ºC
• Hydrophobic material, so waterproofs the roof instantly
• Highly elastic, can bridge cracks
• Non-slip top coat available 
• High tensile and tear strength, meaning the membrane remains durable where others tear

Uses

• Designed for use indoor and outdoor as a primer on mineral substrates such as concrete and cementitious screed. You can use it as scratch primer by adding oven dried silica sand in a proportion of 1: 0,5 till 1: 2.
• Fulfils the requirements of the relevant directive about the effect of rising humidity and can be applied on surfaces in contact with the ground if a damp proof course has been properly installed and is intact.
• Has been tested and classified as low emission in Systems like MasterTop® 1325.

Benefits

• Low viscosity
• Easy to apply
• Excellent penetration
  
• Seals pores and capillaries
• Excellent bond to

TDS

Other Primers

Bitumen felt - MasterTop P 698

Concrete cementitious / screed - MasterTop P 617 or MasterTop P 650

Asphalt screed (mind. AS-IR10) - MasterSeal P 660 or MasterTop BC 375 N

Plywood (preliminary tests are recommended) - MasterSeal P 660 or MasterTop P 691 GRP / GFK MasterTop P 691

Iron and Steel - MasterTop P 681 Non-ferrous metals (e.g. aluminum, zinc) MasterTop P 684 Aged MasterSeal membrane MasterTop P 691

Video