PU parquet adhesive
Heavy duty 2-component PU parquet adhesive, Does not contain water nor solvents. Ca 50 min open time after mixing.
Properties
- Solvent free
- Water free
- Very easy to apply
- Forms stable peaks once applied by a notched trowel or spreader comb
- Rapid build up of bond strength
- Very high final bond strength
- Hard-elastic
- Good ‘gap filling’ characteristics
- Does not shrink
- Suitable for all kinds of wood, including moisture sensitive types
- Not affected by fungus or bacteria
Instructions
- PU-20P must be applied within 60 minutes after mixing. Do not apply more to the surface that can be covered with parquet within 60 minutes. Slide the parquet onto the adhesive layer and tap into place or tamp down with a rubber hammer. A minimum of 80% contact coverage is required to ensure the parquet adhesion. Loading the parquet with weights will improve the final bond strength. Wait at least 24 hours before sanding and finishing the parquet.
Applications
- PU-20P is suitable for indoor bonding of all types of wooden floors such as solid, stab, pre-finished, and on-end parquet, wood-plank and wood-block including laminates and exotic timbers.
- Suitable for use on porous and non-porous surfaces such as concrete, screeds, wood, chipboard and large particle size chipboard, including floors with underfloor heating.
- PU-20P is also extremely suitable for bonding moisture sensitive wood onto moderately porous surfaces.
- Coverage 1.2kg per m2
