Description
DESMOPOL DW – Potable Water-Approved Polyurethane Waterproofing Membrane
Two-Component, Solvent-Free Waterproofing for Drinking Water Storage Tanks
DESMOPOL DW is a two-component, 100% solids, solvent-free polyurethane waterproofing membrane specifically developed for applications involving contact with water intended for human consumption. Once cured, it forms a continuous, seamless, elastic and fully bonded waterproof barrier suitable for concrete potable water storage tanks that are not exposed to ultraviolet radiation.
Its thixotropic formulation allows application to suitable horizontal and vertical surfaces, forming a continuous membrane without joints or overlaps. DESMOPOL DW has WRAS approval under BS 6920 for suitability in contact with water intended for human consumption and carries CE marking supported by a Declaration of Performance.

Key Benefits
- Potable water contact approval – WRAS approved under BS 6920 for relevant applications involving water intended for human consumption.
- 100% solids formulation – solvent-free, two-component polyurethane membrane.
- Seamless waterproof protection – forms a continuous, fully bonded membrane without joints or overlaps.
- Elastic and durable – tensile strength greater than 10MPa and elongation at break greater than 110% according to manufacturer testing.
- Thixotropic formulation – suitable for application to appropriate vertical and horizontal surfaces.
- High-build application – designed to achieve a recommended membrane thickness of 1.5–2mm.
- CE marked – supported by a Declaration of Performance under the applicable concrete surface protection standard.
Suitable Applications
- Concrete drinking water storage tanks.
- Potable water reservoirs and storage structures.
- Concrete tanks and structures in contact with water intended for human consumption.
- Swimming pools and water parks as part of the manufacturer's specified system, with TECNOTOP 2CP as the mandatory finishing coat.
- Suitable waterproofing applications where a seamless, elastic polyurethane membrane is required and the substrate is not subject to moisture pressure from behind.
Important: For potable water storage tanks, DESMOPOL DW is intended for use in areas not exposed to UV radiation. For swimming pools and aquatic areas, TECNOTOP 2CP must be applied as the specified finishing coat. DESMOPOL DW must not be treated as a standalone exposed pool finish.
Technical Specifications
| Product type | Two-component aromatic polyurethane membrane |
| Formulation | 100% solids, solvent-free |
| Density | 1.35 ±0.05 g/cm³ |
| Viscosity | 12,500 ±200 cps |
| Solids content | 100% |
| VOC content | 0 g/l |
| Mixing ratio by weight | 4.35:1 (Component A : Component B) |
| Pot life | Approximately 30–35 minutes |
| Drying time | Approximately 5–6 hours |
| Recoat time | 6–24 hours |
| Recommended thickness | 1.5–2mm |
| Typical consumption | 2.05–2.75kg/m² |
| Application method | Notched trowel or roller |
| Application temperature | 5°C to 35°C |
| Water temperature resistance | -20°C to +60°C, with up to +80°C for a maximum of 24 hours according to the datasheet |
| Tensile strength | Greater than 10MPa |
| Elongation at break | Greater than 110% |
| Tear strength | 36N/mm |
| Adhesion to concrete | Greater than 1.5MPa |
| Hardness | Shore A greater than 80 / Shore D greater than 50 |
| Watertightness | Pass – EN 1928 |
| Colour | White |
| Packaging | 15kg kit – 12.2kg Component A + 2.8kg Component B |
Coverage and Consumption
DESMOPOL DW has a recommended minimum membrane thickness of approximately 1.5–2mm. The manufacturer's specified consumption is approximately 2.05–2.75kg/m², depending on substrate condition and application requirements.
Indicative coverage based on the manufacturer's consumption range:
- 1m²: approximately 2.05–2.75kg.
- 10m²: approximately 20.5–27.5kg.
- 25m²: approximately 51.25–68.75kg.
- 50m²: approximately 102.5–137.5kg.
A 15kg kit provides an indicative coverage of approximately 5.45–7.32m² at the recommended consumption. Actual coverage will depend on substrate condition, surface profile and the required finished thickness.
Application Guidance
Substrate Preparation
The substrate must be sound, strong, cohesive, dry and properly prepared. Concrete should be fully cured, normally allowing 28 days, unless the permitted moisture level for the selected primer and system has been verified.
Remove laitance, grease, oils, release agents, dust and other contaminants. The manufacturer recommends appropriate mechanical preparation, such as sanding, grinding, milling or shot blasting, to achieve a suitable surface profile. Its guidance references ICRI CSP 3–5.
Priming
Select a compatible primer according to the substrate condition and moisture level. Tecnopol identifies the following primer options in its DESMOPOL DW technical guidance:
- PRIMER PU-1050 or PRIMER PUc-1050.
- PRIMER EP-1020 or PRIMER EP-1010.
- PRIMER WET.
The appropriate primer must be selected according to the substrate and its moisture conditions. Follow the relevant primer datasheet before applying DESMOPOL DW.
Mixing
DESMOPOL DW is supplied as a two-component kit. Homogenise each component separately before combining.
- Mix Component A and Component B in a ratio of 4.35:1 by weight.
- Use mechanical mixing equipment at medium speed.
- Continue mixing until a consistent, homogeneous product is obtained.
- Do not add solvents, water or other liquids.
- Use the mixed material within its approximate 30–35-minute pot life.
Application
Apply using a notched trowel or suitable roller, following the manufacturer's specified application procedure. The membrane should be applied to achieve the recommended thickness of approximately 1.5–2mm.
Where the membrane is being applied to concrete or mortar, ensure the surface is correctly prepared and primed. Follow the manufacturer's instructions for application thickness, drying and recoat times.
Swimming Pool and Water Park Applications
DESMOPOL DW is listed by Tecnopol for swimming pools and water parks. However, the manufacturer specifically requires TECNOTOP 2CP as the finishing coat for these applications.
- Apply DESMOPOL DW in accordance with the specified waterproofing system.
- Allow the membrane to reach the required condition before applying the finishing coat.
- Apply TECNOTOP 2CP in accordance with its separate technical datasheet.
- Observe the complete curing requirements of the finished system before filling with water.
Important: TECNOTOP 2CP is mandatory for the manufacturer's swimming pool and aquatic-area system. Do not leave DESMOPOL DW exposed as the final pool finish.
Potable Water Storage Applications
DESMOPOL DW is designed for waterproofing concrete storage tanks containing water intended for human consumption, where the membrane is not exposed to UV radiation.
The product holds WRAS approval under BS 6920. The manufacturer advises checking and confirming approval availability and the relevant certification documentation before use.
Always verify the applicable approval, intended use, substrate preparation and completed system requirements before placing a tank into service for drinking water storage.
Important Application Limitations
- Apply in dry conditions and avoid moisture on or within the substrate.
- Do not apply where water or moisture pressure may act from behind the treated surface, including groundwater pressure.
- DESMOPOL DW is aromatic and is not intended to remain exposed to UV radiation in potable water storage applications.
- Swimming pool and water park applications require TECNOTOP 2CP as the finishing coat.
- Never add solvents, water or other liquids to the product.
- Consult Tecnopol for substrates or application situations not specifically covered by the manufacturer's documentation.
Storage and Shelf Life
Store in the original, unopened containers in a dry environment between 5°C and 35°C. Protect from direct sunlight, excessive heat, cold and moisture.
The manufacturer's stated shelf life is 12 months when stored under the recommended conditions. Once opened, the product must be used.
Certifications and Technical Documentation
DESMOPOL DW carries CE marking supported by a Declaration of Performance and holds WRAS approval under BS 6920 for relevant contact with water intended for human consumption.
The manufacturer advises confirming the availability of the relevant approval documentation before specifying or using the product for a potable water application.
Downloads
Consult the manufacturer's documentation for full product properties, application procedures, certification details and health and safety requirements.
Frequently Asked Questions
What is DESMOPOL DW used for?
DESMOPOL DW is a two-component polyurethane waterproofing membrane designed principally for concrete potable water storage tanks that are not exposed to UV radiation. Tecnopol also lists swimming pools and water parks as applications when used with the specified finishing system.
Is DESMOPOL DW approved for drinking water contact?
Yes. Tecnopol states that DESMOPOL DW holds WRAS approval under BS 6920 for suitability in contact with water intended for human consumption. The manufacturer advises checking the availability of the relevant approval documentation.
Can DESMOPOL DW be used in swimming pools?
Yes, as part of the manufacturer's specified system. TECNOTOP 2CP must be applied as the finishing coat for swimming pools and aquatic areas.
What thickness should DESMOPOL DW be applied at?
The manufacturer recommends a membrane thickness of approximately 1.5–2mm, with consumption of approximately 2.05–2.75kg/m².
What is the mixing ratio for DESMOPOL DW?
The mixing ratio is 4.35:1 by weight, Component A to Component B. Mix mechanically until a homogeneous material is obtained.
How long does DESMOPOL DW take to dry?
The manufacturer's approximate drying time is 5–6 hours, with a recoat window of 6–24 hours. Actual times vary according to temperature, humidity and substrate conditions.
Can DESMOPOL DW be applied to damp concrete?
The manufacturer requires dry application conditions and warns against moisture in or behind the substrate, including pressure from groundwater. The correct primer must be selected according to the substrate moisture conditions.
What size is the DESMOPOL DW kit?
The manufacturer's standard kit contains 12.2kg of Component A and 2.8kg of Component B, giving a total kit weight of 15kg.
Related Tecnopol Products
Need Product Information?
For DESMOPOL DW availability, manufacturer documentation and general product enquiries, contact Clever Shield.
Call: 0800 7022176
Important: Clever Shield supplies products and manufacturer technical information. We do not design or specify waterproofing systems for individual buildings. Product selection, compatibility, substrate preparation and application must be checked against the manufacturer's current technical documentation and project requirements.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security

You may also be interested in
Recently viewed
What Our Customers Say
Very good 4.7/5
Exceptional Advice & Support
Hands down in all of my reviews I've done in 21+ years, Clever Shield Coatings is one I'll always remember as the staff are friendly & passionate about their job - looking out for the customer and getting the job done right first time.
Sunny
Verified customer
Fast, friendly and reliable…
Fast, friendly and reliable. I was able to get my job done quickly and my customer was happy with the prices.
Thanks.
Kamil
Verified customer
Exceptional Advice & Support
We have been using clever shield (dealing with Richard) for over 2 years. They always give good service deliveries on time and even give technical advise when needed.
JAC
Verified customer
Really helpful! great service
Spoke to technical for some advice on the product and it was really helpful, great service
Tina Mansfield
Verified customer
Great company / knowledgeable
What a great company - knowledge about the products, spent lots of time talking me through everything - if only every company was like this one !
Ostler Info
Verified customer
Great company and speedy delivery
Really great company to deal with,excellent customer service,speedy delivery will definitely recommend and use again as a satisfied customer
Del Upson
Verified customer
Great Technical Support
Great technical support and advice on wykamol products would highly recommend this company
Shirley
Verified customer
Highly Recommended
Sandra Dow
Verified customer



