Metal Bond Rapid 5 Minute Epoxy Adhesive

Sylmasta Metal Bond Rapid 5 Minute is a fast curing, grey setting epoxy adhesive used as both a metal glue and a filler.

It offers high strength adhesion to all types of metals and other rigid materials. It can be used as a filler or glue for metal castings, automotive parts, test rigs and models. It repairs ceramics, brick, plaster, wood, fibreglass objects and pipes.

The 5 minute cure speed of Metal Bond Rapid means that there is minimal holding or clamping time, but still enough time to put an assembly together without rushing. It does not drip or run when applied to vertical surfaces due to its unique thixotropic formulation.

Metal Bond 5 Minute is available in a 25ml syringe or 50ml cartridge. The two components of Metal Bond are pre-measured in the syringe for consistency and easy mixing. The cartridge is applied using an applicator gun, available to purchase separately.

How to use Metal Bond Rapid 5 Minute Epoxy Adhesive as a glue or a filler

When bonding parts together using Metal Bond Rapid 5 Minute, surfaces must be clean, dry and free from all traces of dust, grease, oil and other materials. To improve bond strength, both surfaces can be lightly abraded prior to the application of epoxy adhesive.

To use Metal Bond, snap off the nozzle tip on the syringe and remove the cap from between the piston rods. Extrude the required amount of epoxy and then mix the two components together using a stirrer for about 30 seconds until an even mix is achieved.

The mixed epoxy is applied to one surface, after which the two surfaces requiring bonding are pressed or clamped together. Sylmasta Metal Bond sets in 3 to 5 minutes at 20°C. It should be left undisturbed for a handling time of 30 minutes. A full cure is achieved within 4 to 6 hours.

When using Metal Bond as a filler, the epoxy adhesive is applied into gaps and cracks where it will cure to seal the hole in less than 5 minutes.

Once Metal Bond Epoxy has been applied, the cap should be placed on part-used cartridges for re-use of the epoxy at a later date. Under the correct conditions, Metal Bond 5 Minute has a shelf life of two years from the date of manufacture.

Benefits of Metal Bond Rapid 5 Minute Epoxy Adhesive

• Fast setting for making rapid repairs
• Sets to a dark metallic grey to blend in with metal
• Can be tapped, drilled, screwed, sawed, machined, ground
• Offers high-strength adhesion at the same time as working as a filler
• Does not drip or run when applied to vertical surfaces

Applications

• Bonding of metal, ceramics, brick, plaster, wood and fibreglass objects
• Repairing pinhole leaks, cracks and pitting in pipes and tanks
• Manufacturing assemblies and model making
• Repairing industrial equipment
• Filling holes and cracks in metal castings, automotive parts and machinery