Conica Polyurea Liquid Coatings

Coniproof Hand or Spray Applied Polyurea

What makes Coniproof hand applied polyurea different?

Coniproof hydrophobic polyurea - seamless and instant waterproofing liquid coating system are easily applied to both flat and vertical surfaces.

 

 

 

Coniproof 413 and Coniproof 414 are a two component, solvent free, polyurea membranes for hand application with high crack bridging property.

• Continuous membrane: monolithic – no laps, welds or seams
• Fully bonded to substrate: can be applied to a wide range of substrates with the appropriate primer

• Coniproof 414 is thixotropic and makes easy application to vertical and sloping areas (upstands and detailing made easy)

• Coniproof 413 is self-levelling and makes easy application to flat areas
• High elongation - allows for thermal movement
• Moisture tolerant - allowing for all seasons application
• Easily hand applied by roller, brush or squeegee to flat roofs, balconies, walkways and most structural waterproofing projects
• Low VOC’s 
• Applied directly - over other roof coatings, over new cold or warm roof build up - OSB/Ply, or carrier sheet

Associated products - top coats and sealants are available to compliment any project.

How to Apply

Coniproof is a two-component system, once mixed it can be applied by roller, brush or squeegee to form a seamless hydrophobic membrane. The material cures rapidly and forms a bubble free membrane in a few hours only with strong adhesion to many types of surfaces.

• ETAG and CE classified.
• Manufacturer’s warranty

• Insurance backed guarantees available

Coniproof Spray Applied Polyurea

Highly elastic, low VOC, ultra-fast curing, spray-applied pure polyurea membrane for waterproofing applications

• Excellent crack bridging ability
• Highly elastic membrane
• Fast curing times
• Thick layer application (up to 2 kg/m2 applied in a single layer)

Where to use Coniproof spray applied polyurea?

• Flat and architectural roofs.
• Horizontal and vertical substrates. 
• Internal and external areas. 
• Concrete, cementitious mortar or steel substrates. 
• Reinforced concrete to protect it against carbonation, chloride induced corrosion or chemical attack in industrial environments. 
• Waste water treatment plants (urban and industrial), both in the inflow and outflow areas. 
• Steel and concrete pipes. 
• Car Park Decks.

 

What makes Coniproof Spray applied polyurea different?

Spray delivered and ultra-fast curing: enables easy application to form a monolithic waterproofing membrane on simple and complex surfaces. 

• Rapid curing
• Continuous membrane: monolithic – no laps, welds or seams
• Excellent chemical resistance
• Waterproof and resistant to standing water
• Fully bonded to substrate: can be applied to a wide range of substrates with the appropriate primer
• High water vapour permeability
• High resistance to carbon dioxide diffusion: Protects concrete from rebar corrosion
• High abrasion and impact resistance: Withstand mechanical traffic
• High elasticity and crack bridging capability: Remains elastic at low temperatures; Eg approx. – 45°C o High durability and protection with reduced cracking due to embrittlement
• Does not soften at high temperatures
• Resistance to root penetration
• Fully certified to meet UK requirements

Note we recommend Coniproof  top coat is applied to all application.

Conica - International Suppliers of Polyurea Floor Coatings

For over 40 years, CONICA has established itself as one of the world’s market leaders in polyurea coatings.

As well as outstanding liquid roof coatings, CONICA, as a driver of innovation, develop, produce and supply many high-end floors for sports, industry, healthcare, residential buildings, decorative areas and many other applications.