Sump and Pump Systems
Pumped Drainage Systems for Basement Applications
Quick Links
A range of foul and ground water pumped drainage systems suitable for basement applications.
Ground Water Systems
Our range of ground water pumping systems are specially designed for the removal of ground water from basement membrane systems.
There are a variety of different models to suit most installations including single, twin and battery backup options along with a range of alarm options. The systems are very versatile, enabling the installer to locate inlets to their specifications.
SumpFlow
The SumpFlo™ is specially designed for the removal of groundwater from basement cavity drainage membrane systems. The system comprises of a polyethylene tank, locking access cover (pedestrian duty, not suitable for roadways) and powerful submersible pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
The system comes complete with a High Level Alarm (9V), which acts as a warning system to alert the end user if the water rises above the normal operating level within the tank. The alarm is designed to activate via a separate float switch.
MODELS
- SumpFlo (301)
- SumpFlo (303)
SumpFlow Twin
The SumpFloTwin™ is specially designed for the removal of groundwater from basement cavity drainage membrane systems. The system comprises of a polyethylene tank, locking access cover (pedestrian duty, not suitable
for roadways) and two powerful submersible pumps. The system is very versatile, enabling the installer to locate inlets to their specifications.
The system comes complete with a High Level Alarm (9V), which acts as a warning system to alert the end user if the water rises above the normal operating level within the tank. The alarm is designed to activate via a separate float switch. Available in single and twin discharge configuration.
MODELS
- SumpFlo Twin (301)
- SumpFlo Twin (303)
SumpFlow BBPS
The SumpFlo BBPS™ is specially designed for the removal of groundwater from basement cavity drainage membrane systems. The system comprises of a polyethylene tank, locking access cover (pedestrian duty, not suitable for roadways), powerful submersible pump and 24V backup pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
The system comes complete with a battery back-up pump system, which is designed especially for where the possibility of primary pump failure through either a pump fault or loss of mains power would be catastrophic.
The system acts as a back-up that will alert the end user if the water rises above the normal operating level within the tank and will activate a 24V back-up pump. Available in single and twin discharge configuration.
MODELS
- SumpFlo BBPS (301)
- SumpFlo BBPS (303)
SumpFlo BBPS Twin
The SumpFlo Twin BBPS™ is specially designed for the removal of groundwater from basement cavity drainage membrane systems. The system comprises of a polyethylene tank, locking access cover (pedestrian duty, not suitable for roadways), 2no. powerful submersible pumps and 24V backup pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
The system comes complete with a battery back-up pump system, which is designed especially for where the possibility of primary/ secondary pump failure through either a
pump fault or loss of mains power would be catastrophic. The system acts as a back-up that will alert the end user if the water rises above the normal operating level within the tank and will activate a 24V back-up pump. Comes standard with twin discharge..
MODELS
- SumpFlo Twin BBPS (301)
- SumpFlo Twin BBPS (303)
BlackSump
The BlackSump™ is especially designed for the removal of groundwater from basement membrane systems. The system comprises of a polypropylene tank, circular locking access cover (pedestrian duty, not suitable for roadways) and a powerful submersible pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
The system comes complete with a High Level Alarm (9V), which acts as a warning system to alert the end user if the water rises above the normal operating level within the tank. The alarm is designed to activate via a separate float switch.
MODELS
- Black Sump (301)
SumpFlo Pro
The Sumpflo Pro™ is specially designed for the removal of groundwater from basement cavity drainage membrane systems. The system comprises of a (large capacity) 200 litre polyethylene tank, locking access cover (pedestrian duty, not suitable for roadways) and a powerful submersible pump. The system is a very versatile, enabling the installer to locate inlets to their specifications.
MODELS
- SumpFlo Pro (303)
SumpFlo Pro Twin
The Sumpflo Pro Twin™ is specially designed for the removal of groundwater from basement cavity drainage membrane systems. The system comprises of a (large capacity) 200 litre polyethylene tank, locking access cover (pedestrian duty, not suitable for roadways) and two powerful submersible pumps. The system is a very versatile, enabling the installer to locate inlets to their specifications.
MODELS
- SumpFlo Pro Twin (303)
Foul Water Systems
Our range of foul water systems are specifically designed for the collection and removal of foul water where conventional gravity drainage to the main sewer is not possible and/or economical to install.Our range comes in both single and twin pump configurations and in a variety of tank sizes. There is also a wide range of pumps/control options available to suit your precise requirements.
DrainFlo 150
The DrainFlo 150 is a fully automatic packaged pumping station specifically designed for pumping foul water to high level when gravity drainage is not possible to install.
The system comprises of a polyethylene tank, locking access cover (pedestrian duty,
not suitable for roadways) and a powerful submersible pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
MODELS
- DrainFlo 150
DrainFlo 200
The DrainFlo 200 is a fully automatic packaged pumping station specifically designed for pumping foul water to high level when gravity drainage is not possible to install. The system comprises of a polyethylene tank, locking access cover (pedestrian duty, not suitable for roadways) and a powerful submersible pump. The system is very versatile, enabling the installer to locate inlets to their specifications.
MODELS
- DrainFlo 200
DrainFlo 360
The DrainFlo 360 is a fully automatic packaged pumping station specifically designed for pumping foul water to high level when gravity drainage is not possible to install.
The system comprises of a polyethylene tank, locking access cover (pedestrian duty, not suitable for roadways), powerful submersible pump and control panel. The system is very versatile, enabling the installer to locate inlets to their specifications
MODELS
- DrainFlo 360
DrainFlo 360 Twin
The DrainFlo 360 Twin is a fully automatic packaged pumping station specifically designed for pumping foul water to high level when gravity drainage is not possible to install.
The system comprises of a polyethylene
tank, locking access cover (pedestrian duty,
not suitable for roadways), two powerful submersible pumps and control panel. The system is very versatile, enabling the installer to locate inlets to their specifications.
MODELS
- DrainFlo 360 Twin
Above Ground Systems
Our range of macerators and and waste water pump systems are specically designed for the removal of waste water from where conventional gravity drainage to the main sewer is not possible and/or economical to install.
There are a variety of different models to suit most installations. These pumping systems can be installed in a variety of applications from light domestic through
to industrial.
PowerFlush
The PowerFlush is a fully automatic macerator suitable for pumping waste water from a complete bathroom to a higher level when gravity drainage is not possible and/or economical to install.
The system is suitable for installing either at the initial building stage or retro fitting to existing buildings and can accept waste connections from a toilet, basin, shower or bidet.
MODELS
- PowerFlush
AquaFlush
The AquaFlush is a fully automatic waste water pumping system suitable for pumping waste water to a higher level when gravity drainage is not possible and/or economical to install.
The system is suitable for installing either at the initial building stage or retro fitting to existing buildings and can accept waste connections from a sink, washing machine, dishwasher or similar.
MODELS
- AquaFlush
High Level Alarms
High level alarms range provides an early warning in case of a high level condition.
A 9V battery powered high level alarm suitable for installation within any of the ground water pump systems. Audio sounder with mute button.
KEY FEATURES
- No mains supply required
- Easy to install
- Can be retrofitted
SUITABLE FOR
- SumpFlo (as standard)
- SumpFlo Twin (as standard)
- SumpFlo BBPS
- SumpFlo Twin BBPS
- BlackSump (as standard)
DIMENSIONS
MODEL
HIGH LEVEL ALARM 9V
Height / Width / Length (mm) 90 / 90
High Level Alarm - Mains Operated
This unit should be wall mounted and will notify clients of a high water level via an audio and visual signal.
The unit can be supplied with either a microswitch float switch suitable for ground water systems, or a sewage float switch suitable for foul water systems.
MODELS
- Microswitch float switch (suitable for ground water)
- Sewage float switch (suitable for foul water)
KEY FEATURES
- Visual lamp
- Loud 24V sounder
- Mute button
- Mechanical float switch
SUITABLE FOR
- SumpFlo
- SumpFlo Twin
- Sump Flo Pro
- Sump Flo Pro Twin
- DrainFlo 150
- DrainFlo 200
DIMENSIONS
MODEL
HLA (MAINS)
Height / Width / Length (mm) 150 / 190 / 80
High Level Alarm - Mains and Battery Operated
Should there be a power failure the trickle charge battery will automatically take over. This unit should be wall mounted and will notify clients of a high water level via an audio and visual signal. The unit can be supplied with either a microswitch float switch suitable for ground water systems, or a sewage float switch suitable for foul water systems.
MODELS
- Microswitch float switch (suitable for ground water)
- Sewage float switch (suitable for foul water)
KEY FEATURES
- Visual lamp
- Loud 24V sounder
- Mute button
- Mechanical float switch
SUITABLE FOR
- SumpFlo
- SumpFlo Twin
- Sump Flo Pro
- Sump Flo Pro Twin
- DrainFlo 150
- DrainFlo 200
DIMENSIONS
MODEL
HIGH LEVEL ALARM 9V
Height / Width / Length (mm) 200 / 250 / 90
Basement Monitoring Systems & Battery Back Up
Designed to monitor automatic water sump pumps, it is wired in the power line to the pump. It also has the option to add a high level water alarm indicator. A built-in alarm relay can signal a home automation system, house alarm or a remote dialler.
KEY FEATURES
- Compact
- Multi-function
- Remote notification
SUITABLE FOR
- SumpFlo
- SumpFlo Twin
- SumpFlo BBPS
- SumpFlo Twin BBPS
- Sump Flo Pro
- Sump Flo Pro Twin
DIMENSIONS
MODEL
BMS-BB
Height / Width / Length (mm) 90 / 158 /
Battery back-up systems
Battery back-up systems provide peace of mind by monitoring the pump system and activating the battery operated pump/s in the event of mains power loss.
PowerSafe
The PowerSafe® stores power in case of a mains power loss, protecting your property from flooding. Don’t worry, the PowerSafe® is completely automatic!
The PowerSafe range of fully automatic battery back up systems are designed to offer your customer peace of mind for their basement drainage. The system can be used on single or dual pump configurations and is suitable for both
groundwater and foul waste. It comes complete with a built in GSM telemetry for complete monitoring of your pumped drainage system (not available on the PowerSafe ECO).
The PowerSafe is suitable for installing either at the initial building stage, or retrofitting to existing buildings. The system comprises of a PowerSafe control panel, cable cover, battery holder and batteries (no. of batteries to be
specified at time of order).
SUITABLE FOR
- All pumping stations (below and above ground)
KEY FEATURES
- Hand/Off/Auto switches
- High Level Audible Alarm with Mute
- Button
- Duty/Assist Configuration (Alternates switching of pumps)
- Visual Indication for: (Supply On, Pumps Running, Pumps Tripped & HL)
- Available in both single & dual pump configuration
- Single-phase power supply 230V
- Automatic battery charger
- LCD backlit display*
- Hour run meter*
- No. Start meter*
KEY FEATURES DIMENSIONS
- Overload protection
- Reporting of scheduled maintenance*
- Automatic load TEST*
- General alarm output
- Removable front door
- Steel box painted with powder, protection IP31
- Integral telemetric GSM module*
* Not available on PowerSafe ECO. on † PowerSafe ECO: The battery is included in the control panel. For dimensions consider only the control panel.
DIMENSIONS †
UPS 750
This battery back-up system, has been designed for ease of use and works simply by wiring the mains pump into the server unit, in the event of a power failure the main unit’s heavy duty battery will keep the pumps going for a long period of time. This system is quick and easy to install.
TECHNICAL DATA
DIMENSIONS
MODEL UPS 750
Height / Width / Length (mm) 432 / 89 / 490
MODEL POWERFLO
Height / Width / Length (mm) 380 / 300 / 180
MODEL UPS 750
Power Supply to UPS 230V AC
Output Power Capacity 600W
Frequency 50Hz
Battery Type Maintenance-free lead acid
Expected Battery Life 3-5 years
Recharge Time 3 hours
Backup Time 340Watts = 45mins
Weight 24kg
- SumpFlo
- SumpFlo Twin
PowerFlo
The battery back-up system is designed especially for where
the possibility of primary pump failure through either a pump
fault or loss of mains power would be catastrophic. The system
comprises of a control panel, 24V back-up pump, 3 no. float
switches and a non-return valve.
TECHNICAL DATA
MODEL POWERFLO
Power Supply to Panel 230V AC
Power Supply to Pump 24V
Frequency 50Hz
Motor Rating Intermittent
Max. Flow Rate 180l/min
Max. Vertical Output 6.5m
Max. Horizontal Output 45m
Max. Liquid Temp. <40°C
Rated Current 13amps
Discharge Size 1¼"
Cable Length 4m
Battery Life 45min
Colour Grey
DIMENSIONS
MODEL UPS 750
Height / Width / Length (mm) 432 / 89 / 490
MODEL POWERFLO
Height / Width / Length (mm) 380 / 300 / 180
MODEL UPS 750
Power Supply to UPS 230V AC
Output Power Capacity 600W
Frequency 50Hz
Battery Type Maintenance-free lead acid
Expected Battery Life 3-5 years
Recharge Time 3 hours
Backup Time 340Watts = 45mins
Weight 24kg
TECHNICAL DATA
MODEL POWERFLO
Power Supply to Panel 230V AC
Power Supply to Pump 24V
Frequency 50Hz
Motor Rating Intermittent
Max. Flow Rate 180l/min
Max. Vertical Output 6.5m
Max. Horizontal Output 45m
Max. Liquid Temp. <40°C
Rated Current 13amps
Discharge Size 1¼"
Cable Length 4m
Battery Life 45min
Colour Grey
- SumpFlo
- SumpFlo Twin
- SumpFlo
- SumpFlo Twin
- SumpFlo Pro
- SumpFlo Pro Twin
Quick Links